Mounting Kits

The Lazer single lamp bracket is a universal mounting kit for LED auxiliary lights, specifically designed for use in motorsport. It reliably distributes the load generated over a larger area of the vehicle, ensuring maximum stability – even at high speeds or during extreme vibrations. The bracket is fully adjustable and can be flexibly mounted on almost any vehicle type. Thanks to the integrated threaded rods, the tilt angle of the light beam can be precisely adjusted – ideal for hood-mounted lights or cornering lights where exact alignment is crucial.

Read more less

The universal roof mounting kits from Lazer Lamps are the ideal solution for securely and flexibly installing LED light bars with a length of 990 mm to 1320 mm on the vehicle roof. Whether with or without roof rails, thanks to different bracket heights, the system fits almost any vehicle. The robust brackets are made of A2 stainless steel, are satin black powder-coated, completely corrosion-resistant, and meet the highest automotive industry standards. Recessed anti-theft screws in various lengths (20-80 mm) and cylindrical spacers are included, allowing for precise positioning of the light bars. Depending on the vehicle, mounting is done either directly on the roof (only 25 mm bracket width) or on the railing – each with black rivets that ensure a secure hold while maintaining a discreet appearance. For clean and watertight cable routing, suitable cable glands are included, allowing you to route the cables either through the roof rail or directly into the interior. A VHB cleaning cloth for preparing sealing surfaces and electrical butt connectors for secure cable connection after routing through the roof are also included. Note: Lights and wiring harnesses are sold separately. For the Linear-36 Elite and T24 Evolution, a single-lamp wiring harness is already included with the light.

Read more less

The universal roof mounting kit from Lazer Lamps is the ideal solution for securely installing LED light bars with a length between 990 mm and 1320 mm. The robust A2 stainless steel brackets are supplied with high-quality anti-theft components and allow for flexible mounting – either directly on the roof or on the roof rail. By choosing different bracket heights, the system is suitable for almost any vehicle design, with or without rails. The powder-coated brackets are UV-stable, completely corrosion-resistant, and meet the strict quality standards of the automotive industry. Recessed anti-theft screws in lengths from 20 mm to 80 mm, as well as cylindrical spacers in various sizes, ensure precise and secure positioning of the light bar. The attachment is made with black rivets, which not only provide stability but also blend discreetly into the vehicle's lines. Suitable cable grommets are included for professional cable routing – ideal for routing through the rail or directly into the roof and interior. A VHB cleaning cloth for preparing adhesive surfaces and electrical butt connectors for a tight, secure cable connection are also included in the scope of delivery. Note: Lights and wiring harnesses are sold separately. A single-lamp wiring harness is already included with the following models: Linear-42 Elite, Triple-R 24 Elite, and Triple-R 24 Elite+.

Read more less

Lazer Lamps' universal roof mounting kits offer you a robust and flexible solution for installing LED light bars with a length of 990 mm to 1320 mm. The brackets, made of high-quality A2 stainless steel, are available in various heights and are suitable for vehicles with and without roof rails. This ensures a precise, discreet, and secure mounting – without compromise. Thanks to their UV-stable, black satin powder coating, the brackets are completely corrosion-resistant and meet the high quality requirements of the automotive industry. For additional theft protection, recessed anti-theft screws in various lengths (20 mm to 80 mm) are included in the kit. Furthermore, cylindrical spacers in multiple lengths ensure optimal positioning of your light bars. Depending on the version, attachment to the vehicle is either directly to the roof (with a bracket width of only 25 mm) or to the roof rail – with black rivets that are not only stable but also visually unobtrusive. Cable glands are included for clean and sealed cable routing, which you can insert either into the roof rail or directly through the roof into the interior. A VHB cleaning cloth for sealing surfaces and electrical butt connectors for secure cable connection complete the comprehensive kit. Note: Lights and wiring harnesses are sold separately. For the Linear-48 Elite and the Triple-R 28 Elite, a single-lamp wiring harness is already included with the light.

Read more less

Lazer Lamps' universal roof mounting kits offer a well-engineered solution for the easy and secure installation of LED light bars with a length between 990 mm and 1320 mm. The brackets are available in different heights, making them suitable for vehicles with and without roof rails. Made from high-quality A2 stainless steel and finished with a UV-stable, black satin powder coating, the mounts are completely corrosion-resistant and meet the high quality standards of the automotive industry. The scope of delivery includes recessed anti-theft screws in various lengths (20–80 mm) as well as cylindrical spacers, which facilitate the positioning of your light bars. Mounting can be done either directly on the roof (bracket width of only 25 mm) or on the roof rail – each with black rivets that ensure a secure and discreet attachment. The included cable glands allow for a clean, watertight cable entry through the rail or roof into the interior. A VHB cleaning cloth for preparing the adhesive surfaces and electrical butt connectors for restoring the cable connection after routing are also included in the set. Note: Lights and wiring are sold separately. A one-lamp wiring kit is already included with the following models: Linear-36 Elite and T24 Evolution.

Read more less

Lazer Lamps' universal roof mounting kits offer a robust and flexible solution for installing LED light bars with a length between 990 mm and 1320 mm. The kits include high-quality stainless steel brackets and an extensive assortment of anti-theft fasteners – ideal for mounting on the roof, with or without roof rails. Depending on the vehicle type, various heights are available to allow for optimal positioning. Made from A2 stainless steel and finished with a UV-stable, satin black powder coating, the brackets are completely corrosion-resistant and meet the highest quality standards of the automotive industry. The included anti-theft screws in lengths from 20 mm to 80 mm, as well as cylindrical spacers, allow for secure, flexible, and precise attachment of the lights. Mounting is done either directly on the roof (with only 25 mm bracket width) or on the roof rails – each with black rivets for stable, inconspicuous fixation. The included cable glands ensure clean cable routing, allowing for sealed installation through the rail or vehicle roof into the interior. A VHB cleaning wipe for preparing the adhesive surfaces and electrical butt connectors for sealing cable transitions are also included in the scope of delivery. Important:Please check the attached PDF document to see if the kit is suitable for your vehicle and headlights.

Read more less

Lazer Lamps' universal roof mounting kits offer a robust and flexible solution for installing LED light bars with a length between 990 mm and 1320 mm. The kits include high-quality stainless steel brackets and an extensive range of anti-theft fastenings – ideal for mounting on the roof, with or without roof rails. Depending on the vehicle type, various heights are available to ensure optimal positioning. Made from A2 stainless steel and finished with a UV-stable, satin black powder coating, the brackets are fully corrosion-resistant and meet the highest quality standards in the automotive industry. The included anti-theft screws in lengths from 20 mm to 80 mm, as well as cylindrical spacers, allow for secure, flexible, and precise attachment of the lights. Mounting is either directly on the roof (with a bracket width of only 25 mm) or on the roof rail – each with black rivets for stable, inconspicuous fixing. The supplied cable glands ensure clean cable routing, allowing for sealed routing through the rail or vehicle roof into the interior. A VHB cleaning cloth for preparing the adhesive surfaces and electrical butt connectors for sealing cable transitions are also included. Important:Please check the attached PDF document to see if the kit is suitable for your vehicle and headlight.

Read more less

Lazer Lamps' universal roof mounting kits offer a robust and flexible solution for installing LED light bars with a length between 990mm and 1320mm. The kits include high-quality stainless steel brackets and an extensive assortment of anti-theft fasteners – ideal for mounting on the roof, with or without roof rails. Depending on the vehicle type, various heights are available to allow for optimal positioning. Made from A2 stainless steel and finished with a UV-stable, satin black powder coating, the brackets are fully corrosion-resistant and meet the highest quality standards of the automotive industry. The included anti-theft screws in lengths from 20mm to 80mm, as well as cylindrical spacers, allow for secure, flexible, and precise attachment of the lights. Mounting is done either directly on the roof (with only 25mm bracket width) or on the roof rail – each with black rivets for a stable, inconspicuous fixation. For clean cable routing, the included cable glands allow for sealed routing through the railing or vehicle roof into the interior. A VHB cleaning cloth for preparing the adhesive surfaces and electrical butt connectors for sealing cable transitions are also included in the scope of delivery. Important:Please check the attached PDF document to see if the kit is suitable for your vehicle and headlights.

Read more less

Lazer Lamps' universal roof mounting kits offer a robust and flexible solution for installing LED light bars with a length between 990 mm and 1320 mm. The kits include high-quality stainless steel brackets and an extensive range of anti-theft fixings – ideal for mounting on the roof, with or without roof rails. Depending on the vehicle type, different heights are available to allow for optimal positioning. Made from A2 stainless steel and finished with a UV-stable, satin black powder coating, the brackets are completely corrosion-resistant and meet the highest automotive quality standards. The included anti-theft screws in lengths from 20 mm to 80 mm and cylindrical spacers enable secure, flexible, and precise attachment of the lights. Installation is either directly on the roof (with a bracket width of only 25 mm) or on the roof rails – each with black rivets for a stable, inconspicuous fixation. The supplied cable glands ensure clean cable routing, allowing for a watertight installation through the rails or the vehicle roof into the interior. A VHB cleaning wipe for preparing the adhesive surfaces and electrical butt connectors for sealing cable transitions are also included in the scope of delivery. Important:Please check the attached PDF document to see if the kit is suitable for your vehicle and headlights.

Read more less

Lazer Lamps' universal roof mounting kits offer you a robust and flexible solution for installing LED light bars with a length between 990 mm and 1320 mm. The kits include high-quality stainless steel brackets as well as an extensive range of anti-theft fasteners – ideal for mounting on the roof, with or without roof rails. Depending on the vehicle type, various heights are available to ensure optimal positioning. Made from A2 stainless steel and finished with a UV-stable, black satin powder coating, the brackets are completely corrosion-resistant and meet the highest automotive quality standards. The included anti-theft screws in lengths from 20 mm to 80 mm, as well as cylindrical spacers, allow for secure, flexible, and precise attachment of the lights. Mounting is done either directly on the roof (with only 25 mm bracket width) or on the roof rail – each with black rivets for stable, discreet fixation. The included cable glands ensure clean cable routing, allowing for sealed installation through the rail or vehicle roof into the interior. A VHB cleaning cloth for preparing adhesive surfaces and electrical butt connectors for sealing cable transitions are also included. Important:Please check the attached PDF document to confirm if the kit is suitable for your vehicle and headlamp.

Read more less

Lazer Lamps' universal roof mounting kits offer a robust and flexible solution for installing LED light bars with a length between 990 mm and 1320 mm. The kits include high-quality stainless steel brackets as well as an extensive assortment of anti-theft fasteners – ideal for mounting on the roof, with or without roof rails. Depending on the vehicle type, different heights are available to allow for optimal positioning. Made from A2 stainless steel and finished with a UV-stable, satin black powder coating, the brackets are completely corrosion-resistant and meet the highest quality standards in the automotive industry. The included anti-theft screws in lengths from 20 mm to 80 mm, as well as cylindrical spacers, enable secure, flexible, and precise attachment of the lights. Installation is either directly on the roof (with only 25 mm bracket width) or on the roof rail – each with black rivets for a stable, inconspicuous fixation. The supplied cable glands ensure clean cable routing, allowing for sealed installation through the rail or vehicle roof into the interior. A VHB cleaning cloth for preparing the adhesive surfaces and electrical butt connectors for sealing the cable transitions are also included. Important:Please check the attached PDF document to see if the kit is suitable for your vehicle and headlight.

Read more less

Lazer Lamps' universal roof mounting kits offer you a robust and flexible solution for installing LED light bars with a length between 990 mm and 1320 mm. The kits include high-quality stainless steel brackets and a comprehensive range of anti-theft fasteners – ideal for mounting on the roof, with or without roof rails. Depending on the vehicle type, various heights are available to allow for optimal positioning. Made from A2 stainless steel and finished with a UV-stable, satin black powder coating, the brackets are fully corrosion-resistant and meet the highest quality standards of the automotive industry. The included anti-theft screws in lengths from 20 mm to 80 mm, as well as cylindrical spacers, enable secure, flexible, and precise attachment of the lights. Mounting is either directly on the roof (with only 25 mm bracket width) or on the roof rails – each with black rivets for stable, inconspicuous fixation. The supplied cable glands ensure clean cable routing, allowing for sealed installation through the railing or the vehicle roof into the interior. A VHB cleaning cloth for preparing the adhesive surfaces and electrical butt connectors for sealing the cable transitions are also included. Important:Please check the attached PDF document to see if the kit fits your vehicle and headlight.

Read more less

Lazer Lamps' universal roof mounting kits offer you a robust and flexible solution for installing LED light bars with a length between 990 mm and 1320 mm. The kits include high-quality stainless steel brackets as well as an extensive range of anti-theft fasteners – ideal for mounting on the roof, with or without roof rails. Depending on the vehicle type, different heights are available to allow for optimal positioning. Made from A2 stainless steel and finished with a UV-stable, satin black powder coating, the brackets are completely corrosion-resistant and meet the highest quality standards of the automotive industry. The included anti-theft screws in lengths from 20 mm to 80 mm, as well as cylindrical spacers, enable secure, flexible, and precisely fitting attachment of the lights. Mounting is done either directly on the roof (with only 25 mm bracket width) or on the roof rail – each with black rivets for a stable, inconspicuous fixation. The included cable glands ensure clean cable routing, allowing for sealed installation through the rail or the vehicle roof into the interior. A VHB cleaning cloth for preparing the adhesive surfaces and electrical butt connectors for sealing the cable transitions are also included in the scope of delivery. Important:Please check the enclosed PDF document to see if the kit is suitable for your vehicle and headlight.

Read more less

Lazer Tube Clamps offer you a simple, stable, and visually appealing solution for mounting your Lazer high-performance LED lights on horizontal tubes – ideal for roll bars, roof racks, or bull bars. Made from high-quality stainless steel and finished with an electro-polished matte finish, the clamps impress with maximum durability and corrosion resistance. For sizes 42 mm and 60 mm, the Lazer logo is also subtly engraved on the front – a stylish detail that perfectly matches the premium design of Lazer products. The clamps are compatible with all Lazer high-performance LED lights and allow for quick, secure mounting without much effort.

Read more less

Are you looking for an inconspicuous and robust way to mount your LED auxiliary lights – without drilling? Lazer's bumper bracket mounting kit is the ideal solution for almost any vehicle, whether car, SUV, 4x4, or van. The universal bracket can be easily and securely clamped around existing bumper brackets or crash bars, offering not only maximum flexibility but also effective anti-theft protection. The delivery includes two pairs of screws, 80 mm and 120 mm long, which allow you to precisely adapt the bracket to different tube diameters and depths – a well-thought-out alternative to mounting on the license plate holder.

Read more less

Lazer Lamps' universal roof mounting kits offer you a reliable and flexible solution for installing LED light bars with a length between 990 mm and 1320 mm – whether your vehicle has a roof rail or not. The mounts are available in various heights, allowing for a custom-fit and discreet integration. Not suitable for vehicles with panoramic roofs or glossy roof rails – for these cases, we recommend our special integration kits. Made from A2 stainless steel and finished with a UV-stable, black satin powder coating, the mounts are fully corrosion-resistant and meet the highest automotive standards. The anti-theft screws included in the set, in various lengths (20 mm to 80 mm), provide additional security. Cylindrical spacers in multiple lengths are included for precise positioning of the light. Depending on the application, mounting is either directly on the roof (with only 25 mm bracket width) or on the roof rail – each with black rivets for a secure, inconspicuous installation. The supplied cable glands ensure clean cable routing, allowing for tight installation through the rail or vehicle roof. Also included: a VHB cleaning cloth for preparing sealing surfaces and butt connectors for the professional reconnection of cables after routing them into the vehicle interior. Important: In vehicles with a standard LED matrix headlight system, the high beam signal may not be detected when the ECE-approved Linear-42 is to be coupled with the high beam. In this case, an addition to the wiring with a Lazer CAN bus interface is required. Note: Lights and wiring kits are sold separately. A single-lamp wiring kit is already included with the following models: Linear-42 Elite, Triple-R 24 Elite and Triple-R 24 Elite+.

Read more less

Lazer Lamps universal roof mounting kits offer you a reliable and flexible solution for installing LED light bars with a length between 990mm and 1320mm – regardless of whether your vehicle has roof rails or not. The brackets are available in various heights, allowing for a precise and discreet integration. Not suitable for vehicles with panoramic roofs or shiny roof rails – for these cases, we recommend our special integration kits. Made from A2 stainless steel and finished with a UV-stable, satin black powder coating, the brackets are completely corrosion-resistant and meet the highest automotive standards. The anti-theft screws included in the set, in various lengths (20mm to 80mm), provide additional security. Cylindrical spacers in several lengths are supplied for precise positioning of the light. Depending on the application, mounting is either directly on the roof (with only 25mm bracket width) or on the roof rail – each with black rivets for a secure, inconspicuous installation. The supplied cable glands ensure clean cable routing, allowing for tight installation through the rail or vehicle roof. Also included: a VHB cleaning cloth for preparing sealing surfaces and butt connectors for professionally reconnecting the cables after routing them into the vehicle interior. Important: In vehicles with a standard LED matrix headlight system, the high beam signal may not be detected when the ECE-approved Linear-42 is to be coupled with the high beam. In this case, an Lazer CAN-Bus interface will need to be added to the wiring. Note: Lights and wiring kits are sold separately. A one-lamp wiring kit is already included with the following models: Linear-42 Elite, Triple-R 24 Elite and Triple-R 24 Elite+.

Read more less

Lazer pipe clamps offer you a simple, stable, and visually appealing solution for mounting your Lazer high-performance LED lights on horizontal pipes – ideal for roll bars, roof racks, or bull bars. Made from high-quality stainless steel and featuring an electropolished matte finish, these clamps impress with maximum durability and corrosion resistance. For the 42 mm and 60 mm sizes, the Lazer logo is also subtly engraved on the front – a stylish detail that perfectly matches the premium design of Lazer products. The clamps are compatible with all Lazer high-performance LED lights and allow for quick, secure mounting without much effort.

Read more less

Lazer pipe clamps offer you a simple, stable and visually appealing solution for mounting your Lazer high-performance LED lights on horizontal pipes – ideal for roll bars, roof racks or bull bars. Made from high-quality stainless steel and with an electropolished matt finish, the clamps impress with maximum durability and corrosion resistance. For the 42 mm and 60 mm sizes, the Lazer logo is also subtly engraved on the front – a stylish detail that perfectly matches the premium design of Lazer products. The clamps are compatible with all Lazer high-performance LED lights and allow for quick, secure mounting without much effort.

Read more less

The angled transfer plate for the Lazer Sentinel LED headlights is the ideal solution when the standard mounting position does not fit or is difficult to access. The robust, right-angled bracket allows for flexible mounting - for example, on roof rack systems, where you attach the plate to the rail on the underside of the rack using the supplied slot nuts or square nuts. The wide Sentinel mounting kit can then be rotated into a vertical position - for clean, secure, and stable alignment of the light. The transfer plates, supplied in pairs, are made of 5mm thick structural steel and are electro-coated and satin black - matching the look of the original Sentinel brackets. At the same time, the high-quality coating ensures maximum corrosion resistance and a permanently high-quality appearance - even under the harshest conditions.

Read more less

For simple and discreet mounting of the curved 20" Glide light bar, we offer the appropriate license plate bracket kit. The bracket is exclusively suitable for mounting above the license plate and ensures unobtrusive integration, with the mounting brackets disappearing almost invisibly behind and below the light. The two-part construction is attached to the sides of the light and uses the existing threaded holes on the underside for a secure and stable connection. A2 stainless steel screws for attachment to the light are included in the scope of delivery. Rivets and self-tapping screws are included for mounting on the vehicle. An optional anti-theft set is available separately to further protect your installation.

Read more less

The low-profile transfer plate is designed for Sentinel 9-inch LED spotlights with 'slim-line' mounting, enabling lights to be mounted 32mm - 57mm further forward. Ideal for mounting lights where clearance is limited behind the lamp. Constructed from 5mm structural steel, and finished with a satin black electrocoat, the transfer plates perfectly match the finish of the original Sentinel lamp bracket (only compatible with 'slim-line' mount), while providing maximum corrosion resistance to keep your install looking its best for years to come. Supplied as a pair.

Read more less

Manufactured from 3mm thick folded aluminium, which is first pre-treated for corrosion resistance and then black powder-coated, Lazer's universal side mounts offer a lightweight, robust, and visually appealing solution for mounting your high-performance LED lights. The thoughtful design seamlessly integrates with the lines of your vehicle and perfectly complements the professional installation. The mounts are supplied in pairs and include A2 stainless steel fixings (M6). They are compatible with Lazer's Triple-R Series and Carbon Series lights – for maximum flexibility with low weight and high stability.

Read more less

Lazer's side mount kit has been specifically designed for the curved 20" Glide LED light bar, combining maximum versatility with a sleek, low-profile design. Pre-treated with a high-quality e-coating for optimal corrosion protection and then black powder-coated, the kit is not only durable but also visually integrates perfectly with the vehicle's appearance. Made from stainless steel and complemented by A2 stainless steel fasteners, the kit includes a lamp mounting plate that fits precisely into the pre-drilled threaded holes on the underside of the Glide lamp. The included vehicle brackets allow for flexible positioning – the alignment can be adjusted to raise or lower the light by up to 13mm relative to the vehicle's position.

Read more less