Lazer Lamps

Lazer Lamps' universal roof mounting kits offer a robust and flexible solution for installing LED light bars with a length between 990 mm and 1320 mm. The kits include high-quality stainless steel brackets as well as an extensive assortment of anti-theft fasteners – ideal for mounting on the roof, with or without roof rails. Depending on the vehicle type, different heights are available to allow for optimal positioning. Made from A2 stainless steel and finished with a UV-stable, satin black powder coating, the brackets are completely corrosion-resistant and meet the highest quality standards in the automotive industry. The included anti-theft screws in lengths from 20 mm to 80 mm, as well as cylindrical spacers, enable secure, flexible, and precise attachment of the lights. Installation is either directly on the roof (with only 25 mm bracket width) or on the roof rail – each with black rivets for a stable, inconspicuous fixation. The supplied cable glands ensure clean cable routing, allowing for sealed installation through the rail or vehicle roof into the interior. A VHB cleaning cloth for preparing the adhesive surfaces and electrical butt connectors for sealing the cable transitions are also included. Important:Please check the attached PDF document to see if the kit is suitable for your vehicle and headlight.

Read more less

Lazer Lamps' universal roof mounting kits offer you a robust and flexible solution for installing LED light bars with a length between 990 mm and 1320 mm. The kits include high-quality stainless steel brackets as well as an extensive range of anti-theft fasteners – ideal for mounting on the roof, with or without roof rails. Depending on the vehicle type, various heights are available to ensure optimal positioning. Made from A2 stainless steel and finished with a UV-stable, black satin powder coating, the brackets are completely corrosion-resistant and meet the highest automotive quality standards. The included anti-theft screws in lengths from 20 mm to 80 mm, as well as cylindrical spacers, allow for secure, flexible, and precise attachment of the lights. Mounting is done either directly on the roof (with only 25 mm bracket width) or on the roof rail – each with black rivets for stable, discreet fixation. The included cable glands ensure clean cable routing, allowing for sealed installation through the rail or vehicle roof into the interior. A VHB cleaning cloth for preparing adhesive surfaces and electrical butt connectors for sealing cable transitions are also included. Important:Please check the attached PDF document to confirm if the kit is suitable for your vehicle and headlamp.

Read more less

Lazer Lamps' universal roof mounting kits offer a robust and flexible solution for installing LED light bars with a length between 990 mm and 1320 mm. The kits include high-quality stainless steel brackets and an extensive range of anti-theft fixings – ideal for mounting on the roof, with or without roof rails. Depending on the vehicle type, different heights are available to allow for optimal positioning. Made from A2 stainless steel and finished with a UV-stable, satin black powder coating, the brackets are completely corrosion-resistant and meet the highest automotive quality standards. The included anti-theft screws in lengths from 20 mm to 80 mm and cylindrical spacers enable secure, flexible, and precise attachment of the lights. Installation is either directly on the roof (with a bracket width of only 25 mm) or on the roof rails – each with black rivets for a stable, inconspicuous fixation. The supplied cable glands ensure clean cable routing, allowing for a watertight installation through the rails or the vehicle roof into the interior. A VHB cleaning wipe for preparing the adhesive surfaces and electrical butt connectors for sealing cable transitions are also included in the scope of delivery. Important:Please check the attached PDF document to see if the kit is suitable for your vehicle and headlights.

Read more less

Lazer Lamps' universal roof mounting kits offer a robust and flexible solution for installing LED light bars with a length between 990mm and 1320mm. The kits include high-quality stainless steel brackets and an extensive assortment of anti-theft fasteners – ideal for mounting on the roof, with or without roof rails. Depending on the vehicle type, various heights are available to allow for optimal positioning. Made from A2 stainless steel and finished with a UV-stable, satin black powder coating, the brackets are fully corrosion-resistant and meet the highest quality standards of the automotive industry. The included anti-theft screws in lengths from 20mm to 80mm, as well as cylindrical spacers, allow for secure, flexible, and precise attachment of the lights. Mounting is done either directly on the roof (with only 25mm bracket width) or on the roof rail – each with black rivets for a stable, inconspicuous fixation. For clean cable routing, the included cable glands allow for sealed routing through the railing or vehicle roof into the interior. A VHB cleaning cloth for preparing the adhesive surfaces and electrical butt connectors for sealing cable transitions are also included in the scope of delivery. Important:Please check the attached PDF document to see if the kit is suitable for your vehicle and headlights.

Read more less

Lazer Lamps' universal roof mounting kits offer a robust and flexible solution for installing LED light bars with a length between 990 mm and 1320 mm. The kits include high-quality stainless steel brackets and an extensive range of anti-theft fastenings – ideal for mounting on the roof, with or without roof rails. Depending on the vehicle type, various heights are available to ensure optimal positioning. Made from A2 stainless steel and finished with a UV-stable, satin black powder coating, the brackets are fully corrosion-resistant and meet the highest quality standards in the automotive industry. The included anti-theft screws in lengths from 20 mm to 80 mm, as well as cylindrical spacers, allow for secure, flexible, and precise attachment of the lights. Mounting is either directly on the roof (with a bracket width of only 25 mm) or on the roof rail – each with black rivets for stable, inconspicuous fixing. The supplied cable glands ensure clean cable routing, allowing for sealed routing through the rail or vehicle roof into the interior. A VHB cleaning cloth for preparing the adhesive surfaces and electrical butt connectors for sealing cable transitions are also included. Important:Please check the attached PDF document to see if the kit is suitable for your vehicle and headlight.

Read more less

Lazer Lamps' universal roof mounting kits offer a robust and flexible solution for installing LED light bars with a length between 990 mm and 1320 mm. The kits include high-quality stainless steel brackets and an extensive assortment of anti-theft fasteners – ideal for mounting on the roof, with or without roof rails. Depending on the vehicle type, various heights are available to allow for optimal positioning. Made from A2 stainless steel and finished with a UV-stable, satin black powder coating, the brackets are completely corrosion-resistant and meet the highest quality standards of the automotive industry. The included anti-theft screws in lengths from 20 mm to 80 mm, as well as cylindrical spacers, allow for secure, flexible, and precise attachment of the lights. Mounting is done either directly on the roof (with only 25 mm bracket width) or on the roof rails – each with black rivets for stable, inconspicuous fixation. The included cable glands ensure clean cable routing, allowing for sealed installation through the rail or vehicle roof into the interior. A VHB cleaning wipe for preparing the adhesive surfaces and electrical butt connectors for sealing cable transitions are also included in the scope of delivery. Important:Please check the attached PDF document to see if the kit is suitable for your vehicle and headlights.

Read more less

The Air series side transfer plates impress with their high-quality workmanship and black powder coating – for maximum durability and a sleek appearance. Designed to perfectly combine with the separately available side mounting kit (item no. 1118K-B), they offer a flexible and visually appealing solution for your vehicle lighting. Manufactured from stainless steel and supplied with A2 stainless steel mounting hardware, the plates guarantee a durable, secure, and corrosion-resistant installation. The lamp mount fits precisely into the pre-drilled, thread-coated mounting points on the underside of the Air headlights. For additional flexibility, the position of the bracket can be individually adjusted: In combination with the side mounting kit 1118K-B, the height of the light can be adjusted up or down by up to 13 mm - for the perfect alignment on your vehicle.

Read more less

The anti-theft set for the Glide license plate holder provides additional security and peace of mind – especially for permanently mounted lighting systems in outdoor areas. The high-quality A2 security bolts made of rust-free stainless steel enable a secure connection between the mounting plates and the Glide light, as well as between the vehicle mounts and the lamp mounting plates. This significantly hinders unauthorized removal. For a permanently stable mounting, the license plate holder itself is securely attached to the vehicle with the included rivets.

Read more less

The anti-theft kit with side mounts for the Lazer Glide series ensures maximum security when mounting your LED lights and reliably protects against unauthorized removal. The brackets are made of pre-treated stainless steel and are additionally black powder-coated - for optimal corrosion protection and a harmonious appearance. All included fasteners are made of stainless steel and are assembled with a unique locking key - both for securely attaching the light to the bracket and for attaching the bracket to the vehicle. In addition, the bracket can be flexibly aligned: you can move the light up or down by up to 13 mm, depending on the desired installation position.

Read more less

The angled transfer plate for the Lazer Sentinel LED headlights is the ideal solution when the standard mounting position does not fit or is difficult to access. The robust, right-angled bracket allows for flexible mounting - for example, on roof rack systems, where you attach the plate to the rail on the underside of the rack using the supplied slot nuts or square nuts. The wide Sentinel mounting kit can then be rotated into a vertical position - for clean, secure, and stable alignment of the light. The transfer plates, supplied in pairs, are made of 5mm thick structural steel and are electro-coated and satin black - matching the look of the original Sentinel brackets. At the same time, the high-quality coating ensures maximum corrosion resistance and a permanently high-quality appearance - even under the harshest conditions.

Read more less

The low-profile transfer plate is designed for Sentinel 9-inch LED spotlights with 'slim-line' mounting, enabling lights to be mounted 32mm - 57mm further forward. Ideal for mounting lights where clearance is limited behind the lamp. Constructed from 5mm structural steel, and finished with a satin black electrocoat, the transfer plates perfectly match the finish of the original Sentinel lamp bracket (only compatible with 'slim-line' mount), while providing maximum corrosion resistance to keep your install looking its best for years to come. Supplied as a pair.

Read more less

The Sentinel Fixing Bar Kit has been specifically designed to minimise vibration and unwanted movement when mounting your Lazer Sentinel LED spotlights. The two-piece stabilisation arm is made from 2mm thick stainless steel and attaches directly to the lamp with the included bracket. You then fix it to an additional, solid mounting point on your vehicle – for maximum stability even in demanding off-road conditions or at high speeds. With a variable length of 130mm to 230mm, the fixing bar offers flexible application options and is also suitable for additional stabilisation of individual Linear lamps.

Read more less

The anti-theft kit for the Lazer Sentinel series offers you additional protection against unauthorized removal of your LED lights – for peace of mind with every installation. The kit is specially designed for use with Sentinel lights and is compatible with both the slim and wide brackets. Included in the scope of delivery are high-quality security screws made of A2 stainless steel, matching security bits for the side brackets, and special security nuts for the M10 carriage bolts that secure the bracket to the vehicle. Ideal for anyone who wants to make their installation not only functional but also theft-proof.

Read more less

The anti-theft kit for the Lazer Sentinel series offers you additional protection against unauthorized removal of your LED lights – for peace of mind with every installation. The kit has been specially developed for use with Sentinel lights and is compatible with both the slim and wide brackets. Included are high-quality security screws made of A2 stainless steel, matching security bits for the side brackets, and special security nuts for the M10 coach bolts that secure the bracket to the vehicle. Ideal for anyone who wants their installation to be not only functional but also theft-proof.

Read more less

If you're looking for a sleek and elegantly shaped mount for your Sentinel 9" lamp, the Slim Mounting Kit is the perfect choice. The bracket precisely follows the lines of the lamp, ensuring a particularly harmonious look. Made from high-quality cast aluminum and finished with automotive-grade corrosion pre-treatment and a satin black powder coating, it is optimally protected against weather influences – just like the lamp itself. The embossed Sentinel logo on the side also gives the bracket a high-quality and professional look.

Read more less

If you're looking for a sleek and shapely mounting solution for your Sentinel 7" lamp, the slim mounting kit is the perfect choice. The bracket precisely follows the lines of the lamp, ensuring a particularly harmonious appearance. Made from high-quality die-cast aluminum and finished with automotive-grade corrosion pre-treatment and a satin black powder coat, it is optimally protected from the elements – just like the lamp itself. The embossed Sentinel logo on the side also gives the bracket a high-quality and professional look.

Read more less

If you're looking for a particularly robust and visually coordinated mounting solution for your Lazer Sentinel light, the wide mounting kit is the ideal choice. The bracket, made from high-quality die-cast aluminum, offers maximum stability and is specifically designed for demanding applications – whether off-road or on the street. Thanks to automotive-grade corrosion pretreatment and a satin black powder coating, it is perfectly protected against the elements and seamlessly integrates into the design of the Sentinel lights. The embossed Sentinel logo on the side also gives the bracket a professional and high-quality look – perfect for those who value both function and style.

Read more less

Lazer's side mount kit has been specifically designed for the curved 20" Glide LED light bar, combining maximum versatility with a sleek, low-profile design. Pre-treated with a high-quality e-coating for optimal corrosion protection and then black powder-coated, the kit is not only durable but also visually integrates perfectly with the vehicle's appearance. Made from stainless steel and complemented by A2 stainless steel fasteners, the kit includes a lamp mounting plate that fits precisely into the pre-drilled threaded holes on the underside of the Glide lamp. The included vehicle brackets allow for flexible positioning – the alignment can be adjusted to raise or lower the light by up to 13mm relative to the vehicle's position.

Read more less

The Glide Stabilizer Bar Kit has been specially designed for Lazer Lamps' curved Glide LED light bars, ensuring a particularly stable installation with minimal vibration. The two-piece stabilizer arm is made of 2mm thick A2 stainless steel and attaches directly to a pre-drilled threaded hole on the back of the lamp. The additional bracing significantly reduces vibrations, mechanical stress, and movement – ideal for dynamic vehicle use or installations with a larger leverage arm. The kit is suitable for stabilizing a single Glide LED light bar, contributing to a permanently secure and durable mounting.

Read more less

The Linear fixing bracket kit provides additional stability when mounting your Lazer Linear LED headlights – especially in dynamic driving conditions or with longer light bars. The two-part stabilization arm is made of 2 mm thick stainless steel and is attached directly to the lamp using the included bracket. It is then mounted at an additional, fixed point on the vehicle. This effectively reduces vibrations, mechanical stress, and movements that could negatively impact the durability or light output of your installation. The stabilization arm is adjustable in length from 130 mm to 230 mm and is suitable for securing a single Linear headlight.

Read more less

The Linear Anti-Theft Side Mount Kit offers reliable protection against unauthorized removal of your Lazer Linear LED lights – ideal for vehicles where lighting remains permanently installed. The mounts are made of pre-treated stainless steel for maximum corrosion protection and are additionally black powder-coated to blend seamlessly into the vehicle's design. The kit includes all fastening elements made of high-quality A2 stainless steel, each with a special security key. This way, you secure not only the light itself to the mount but also the mount to the vehicle – robust, durable, and theft-proof. For flexible installation, the mount can be adjusted to raise or lower the light by up to 13mm relative to the vehicle mounting point. Only compatible with Linear lights.

Read more less

Lazer's side mount kit has been specifically designed for the Linear LED spotlights, combining a sleek design with high functionality. Pre-treated with an e-coat for maximum corrosion protection and then black powder-coated, the kit boasts an elegant, durable finish – perfectly matched to the Linear series. The mounts offer versatile mounting options: the alignment can be adjusted so that the light can be raised or lowered by up to 13mm relative to the vehicle's position – ideal for precise and discreet integration. All mounting hardware made from A2 stainless steel is included for secure and stable installation. Note: Only suitable for use with Linear products.

Read more less

Lazer's Linear Central Mount Bracket offers a compact, robust solution for mounting your Linear LED light – ideal for central single mounts. The kit combines A2 stainless steel fittings with extremely durable housings made of glass-fibre-reinforced nylon (PA66 GF30), which effortlessly withstands the highest loads and environmental influences. The bracket is inserted directly into the channel on the back of the Linear heatsink and securely fastened with M5 grub screws. For maximum flexibility, the orientation of the bracket can be reversed, allowing you to install the light either facing upwards or hanging below the mounting point. Additionally, the bracket features integrated anti-rotation features for a permanently stable alignment. Note: Only suitable for use with Linear products.

Read more less

The Lazer fixing bracket kit provides additional stability when mounting your Triple-R or ST Evolution LED spotlights – especially under harsh operating conditions or on vehicles with vibration-prone mounting points. The two-piece stabilizing arm is made of 2mm thick, black coated stainless steel and is attached directly to the back of the light using the supplied flat bracket. Then, secure the arm to an additional, rigid point on the vehicle. This significantly reduces vibrations, mechanical stresses, and movements that can negatively impact the durability or alignment of your lighting installation. The fixing arm is adjustable in length from 130mm to 230mm and is suitable for mounting a single spotlight from the Triple-R or ST Evolution series.

Read more less