Lazer Lamps

Two-lamp wiring kit for Lazer Lamps high-performance LED headlights. Setup is quick, easy, and reliable thanks to the 3-pin Superseal connector, requiring no configuration. The kit features a 12V relay (in a waterproof housing), a fuse, a battery clamp at one end, and 1.2m of flex cable on the headlight cable. It allows you to operate Lazer products either in parallel with the vehicle's Standard lighting and/or via an independent switch that can be mounted in your vehicle. All Lazer lamps are sold with a pre-wired socket that connects to the lamp harness connector to facilitate wiring to your vehicle's system. compatible with: Air-130 Elite Sentinel 9'' Elite (with parking light) Sentinel 9'' Highline (with parking light) Linear-18 Elite (with parking light) Triple-R 1250

Read more less

The Lazer Contactless Reader enables contactless reading of CAN-Hi and CAN-Lo data on the vehicle – entirely without a direct, metallic connection to the CAN bus line. Instead, the reader is simply placed around an existing CAN line and reads the signals inductively. This fully preserves the vehicle's manufacturer's warranty, as no cables need to be damaged or cut. This version of the reader operates with a 5V supply voltage and is specially designed for plug & play use with the Lazer CAN-Bus Interface (CANNY). Connection is quick and easy via the included cable set. An integrated LED display reliably signals successful reception of CAN data – ideal for easy function control during installation. Product features: Contactless CAN bus integration without interfering with vehicle wiring Inductive reading method protects the manufacturer's warranty Plug & Play compatible with the Lazer CANNY Interface LED display for status control 5V operating voltage

Read more less

The fluted lens for Lazer Triple-R and ST Evolution LED lights specifically widens the beam angle, ensuring a broader, more even illumination – especially when combining multiple lights. This effectively prevents potential dark transitions in the light pattern, depending on the mounting position and application. Made from high-quality acrylic, the lens is equipped with a circumferential seal that reliably prevents water and dust from entering between the light and the cover. Installation is quick and secure with the four supplied spring clips – no tools required.

Read more less

For a clean and high-quality retrofit of auxiliary lights, Lazer Lamps offers the vehicle-specific grille integration kit for the VW T6.1 . Thanks to specially developed mounting brackets, the powerful LED headlights can be quickly and precisely installed in the vehicle's original grille. The integration is so discreet that the Grenadier's original design is fully preserved – ideal for those who value a factory-like appearance . In addition to the headlights, the kit includes the matching wiring harness and precision-machined mounting brackets that are optimally adapted to the Standard grille. In combination with the included self-tapping plastic screws, a stable and theft-proof installation is guaranteed. Made from a UV-stable and weatherproof composite material , the brackets guarantee long-lasting and reliable fastening – even under extreme operating conditions. For easy and precise installation, the set includes a cutting template for an exact fit , which makes installation much easier. Maximum light output, discreet appearance and lasting durability – perfectly matched to the VW T6.1.

Read more less

The Utility-80 HD (Heavy-Duty) is a new addition to the Utility Series product line for 2023 and builds on our reputation for high-performance LED Work Lights. The product is specifically designed and engineered to meet the rigorous demands of industrial applications in mining, construction, forestry, and agriculture. The Utility-80 HD consists of four high-quality 20W "bin" LEDs that deliver their 8,940 raw lumens of light output through highly reflective, vacuum-metallized optics. These have been redesigned for this product to achieve even better light distribution over a wider area. For customers who desire flexibility and easy control over light intensity, a version of the product with a variable brightness function is available, allowing the operator to increase or decrease the lamp's brightness at the touch of a button. The light color of both 80 HD variants is set to 5000 K. For greater safety, it was carefully selected to maximize the definition of objects and hazards in front of the vehicle while reducing the fatigue that can result from using products with a higher color temperature. In addition to their light output, the lights are characterized by their robust construction and high-quality workmanship. Like all Lazer products, the light benefits from an electronic thermal management system, a CAE-optimized heat sink, a hard-coated polycarbonate lens, and an advanced electronic design. An improved die-cast mount, a repositioned and concealed breathable Gore-Tex membrane, and a redesigned LED/optic arrangement increase the product's robustness and suitability for the harshest environments. As a testament to the product's build quality, the light comes with a 5-year warranty (a 5-year warranty applies to use in passenger cars and commercial fleets; a 2-year warranty applies to all other applications).

Read more less

Do you want maximum control over your auxiliary lighting – without complicated wiring? The CANNY Smart Button from Lazer is your solution. Connected via Bluetooth to the CANNY interface, you can easily control your lighting at the touch of a button – without laying a single new cable. The smart button can be flexibly mounted in the vehicle or even worn on your body. As long as you are within a 10-meter radius of the paired interface, the connection remains stable and reliable. The button can be individually configured via the free CANNY.LZR app – you can control up to four switching outputs with it, either alone or combined with other CANNY buttons. Wireless control of auxiliary lights, reverse lights, work lights, or position lights Usable independently of the vehicle ignition – ideal for off-road use or camping Individually programmable: switching behavior adjustable via app Compatible with all CANNY Interfaces and versatile for 12V accessories Typical applications: Activate/deactivate high beam independently – practical in countries with restrictions on coupled auxiliary lights Switching between position light and main light mode of your Lazer lamps Control of work or reverse lights, even with the ignition off Switching beacon mode on or off Note: If you want to use the button to control the yellow dip mode of an Elite+ lamp, you must install a relay for signal inversion. You can find more information in our blog. The CANNY Smart Button is not only suitable for Lazer auxiliary lighting – you can also use it for other 12V vehicle components, such as auxiliary devices, pumps, or custom modifications. Important: The Smart Button only works in conjunction with a CANNY Interface.

Read more less

The fluted lens for the Lazer Triple-R provides a wider beam of light and prevents dark transitions when multiple lights are used together – depending on the vehicle and application. It is made of high-quality acrylic and features an all-round seal that reliably protects against water and dust. Installation is tool-free via the four supplied spring clips, ensuring the lens sits securely and precisely on the light.

Read more less

The fluted lens for Lazer Triple-R and ST Evolution lights expands the beam, providing wider illumination – ideal when combining multiple lights. It helps to avoid dark transitions in the light pattern and significantly improves overall illumination depending on the application and installation situation. The lens is made of high-quality acrylic and is equipped with an integrated seal that prevents the ingress of water and dust. It is secured with four included spring clips, which allow the lens to be mounted quickly and securely on the light.

Read more less

The lens covers for the Lazer RP series and the Utility-50 and Utility-80 HD lamps offer you additional protection and flexible customisation options – whether functional or visual. Made from robust polycarbonate, the covers can be securely attached to the lamp. Depending on the variant, they either change the design, the light colour or the beam pattern. The yellow lens provides a selective yellow light pattern and improves visibility in poor weather conditions. With the ribbed version, you can also specifically expand the beam angle – ideal for use in a wide variety of conditions.

Read more less

The black lens cover with a printed Lazer logo not only gives your ST Evolution LED headlight a striking look but also protects the lens from external influences. Made from high-quality acrylic, the cover is precisely matched to the ST Evolution series. It is securely attached tool-free using four supplied spring clips – for protection and style in one.

Read more less

The lens covers for Lazer Sentinel lights offer a simple way to visually enhance and protect your headlights. Made from robust polycarbonate, the covers can be mounted securely and precisely. Depending on the version, they provide a new design or alter the light characteristics. Particularly practical: the yellow cover transforms the light's color temperature into selective yellow – ideal for better visibility in poor weather conditions such as fog, rain, or snow.

Read more less

Lazer's Two-Lamp Connector has been specifically developed to securely link two ST Evolution or Triple-R Series LED spotlights together. It provides additional stability to your lighting setup while ensuring both lights remain precisely aligned – ideal for professional, precise mounting with a perfect light beam pattern. Made from high-quality, extruded aluminum with a satin black, anodized finish, the connector boasts durability and an elegant appearance. It simply slides into the upper or lower channels of both lights and is securely fastened with four grub screws – stable, inconspicuous, and effective.

Read more less

Lazer's anti-theft kit offers you additional security when mounting your LED headlights – perfect for anyone who wants to reliably protect their installation against unauthorized removal. The set consists of high-quality security screws made of A2 stainless steel and was specially developed for use with the Central Mounting Kit (1114k) and the Side Mounting Kit (1118k) of the ST/T and Triple-R series. Included in the scope of delivery are matching security keys for a simple yet protected installation. This ensures that your lights are securely mounted and optimally protected against theft, even under demanding conditions.

Read more less

Lazer Lamps neoprene protective covers reliably protect your Triple-R and Linear series LED light bars from dirt, weather, and damage – ideal for times when the lights are not in use. Made from high-quality, impact-resistant, and washable neoprene, the covers not only offer optimal protection but also a durable, perfectly fitting solution. Thanks to robust Velcro fasteners, the covers can be attached or removed quickly and easily. An additional benefit: the covers noticeably reduce wind noise, which can often occur with light bars mounted above the windscreen. Important: Do not use the neoprene cover while the lamps are switched on or powered.

Read more less

Two-lamp wiring kit for Lazer Lamps high-performance LED headlights. Setup is quick, easy, and reliable thanks to the 2-pin Deutsch DT connector, requiring no configuration. The kit features a 12V relay (in a waterproof housing), a fuse, a battery clamp at one end, and 2m of flex cable on the headlight cable. It allows you to operate Lazer products either in parallel with the vehicle's Standard lighting and/or via an independent switch that can be mounted in your vehicle. All Lazer lamps are sold with a pre-wired socket that connects to the lamp harness connector to facilitate wiring to your vehicle's system. compatible with: Linear-24 Flood Utility-25 Utility-25 MAXX Utility-45 Utility-50 Utility-80 HD (heavy duty) RP Spot

Read more less

The two-lamp wiring kit allows for quick, easy, and reliable installation of two Lazer Lamps high-performance LED headlights. The 3-pin Superseal connector requires no additional configuration—simply plug and play. The wiring harness includes a 12V relay in a waterproof housing, a fuse, a battery connector, and 1.2 m of connecting cable per lamp. The lights can be operated either in parallel with the existing vehicle lighting or independently via a separate switch that can be mounted inside the vehicle. All Lazer headlights come with a pre-assembled female connector that fits directly into the male connector of the wiring harness for easy integration into the vehicle electrical system. Air-55 Air-90 Triple-R 750 Triple-R 850 Triple-R 1000 Linear-12 Elite (with Position Light) Sentinel 7'' Elite Sentinel 9'' Sentinel 9'' Chrome

Read more less

The ideal solution for wiring a pair of Lazer high-performance LED headlights, which also feature integrated side/parking light and Beacon functions. Setup is quick, easy, and reliable with 6-pin Superseal connectors and no configuration procedures required. The kit includes a 12V relay (in a waterproof housing), a 30A fuse, a battery terminal connection at one end, and 1.2m of flexible cable on the lamp wires. It allows Lazer products to be operated in parallel with the vehicle's Standard lighting. All Lazer lamps are sold with a pre-wired socket that connects to the lamp harness connector to facilitate wiring to your vehicle's system. compatible with: Triple-R 750 Beacon Triple-R 1000 Beacon Air-55 Beacon Air-90 Beacon

Read more less

Two-lamp wiring kit for Lazer Lamps high-performance LED headlights. Setup is quick, easy, and reliable thanks to the 2-pin Superseal connector, requiring no configuration. The kit features a 12V relay (in a waterproof housing), a fuse, a battery clamp at one end, and 1.2m of flex cable on the headlight cable. It allows you to operate Lazer products either in parallel with the vehicle's Standard lighting and/or via an independent switch that can be mounted in your vehicle. All Lazer lamps are sold with a pre-wired socket that connects to the lamp harness connector to facilitate wiring to your vehicle's system. compatible with: ST Evolution (All Products) Triple-R 750 Elite Triple-R 850 Elite Triple-R 1000 Elite Linear-6 (Standard / Elite) Linear-12 (Standard / Elite) Linear-18 (Standard) Sentinel 7'' Not suitable for: 2x Linear-18 Elite or 2x Sentinel 9'' Elite. To power two of these lights, please use the two-lamp "Medium Power" wiring kit (2L-MP-120).

Read more less

Two-lamp wiring kit for Lazer Lamps high-performance LED headlights. Setup is quick, easy, and reliable thanks to the 4-pin Deutsch DT connector, requiring no configuration. The kit features a 12V relay (in a waterproof housing), a fuse, a battery clamp at one end, and 2m of flex cable on the headlight cable. It allows you to operate Lazer products either in parallel with the vehicle's Standard lighting and/or via an independent switch that can be mounted in your vehicle. All Lazer lamps are sold with a pre-wired socket that connects to the lamp harness connector to facilitate wiring to your vehicle's system. compatible with: Carbon Series (All Products) RP Hyperspot Utility-50 with warning light Utility-50 with red taillight Utility-80 HD (with variable brightness) Please note that the corresponding Lazer single and dual lamp wiring kits for the Utility-80 HD Variable require customers to provide their own switching method to adjust the brightness up/down.

Read more less

Single-lamp wiring kit for Lazer Lamps high-performance LED headlights. Setup is quick, easy, and reliable thanks to the 2-pin Superseal connector, requiring no configuration. The kit features a 12V relay (in a waterproof housing), a fuse, a battery clamp at one end, and 1.2m of flex cable on the headlight cable. It allows you to operate Lazer products either in parallel with the vehicle's Standard lighting and/or via an independent switch that can be mounted in your vehicle. All Lazer lamps are sold with a pre-wired socket that connects to the lamp harness connector to facilitate wiring to your vehicle's system. compatible with: Glide Glide Elite ST Evolution (All Products) Triple-R 750 Elite (Gen2) Triple-R 850 Elite (Gen2) Triple-R 1000 Elite (Gen2) Linear-6 (Standard / Elite) Linear-12 (Standard / Elite) Linear-18 (Standard / Elite) Linear-36 Linear-42 Linear-48 Sentinel 7'' Sentinel 9'' Elite

Read more less

Single-lamp wiring kit for Lazer Lamps high-performance LED headlights. Setup is quick, easy, and reliable thanks to the 4-pin Deutsch connector, requiring no configuration. The kit features a 12V relay (in a waterproof housing), a fuse, a battery clamp at one end, and 2m of flex cable on the headlight cable. It allows you to operate Lazer products either in parallel with the vehicle's Standard lighting and/or via an independent switch that can be mounted in your vehicle. All Lazer lamps are sold with a pre-wired socket that connects to the lamp harness connector to facilitate wiring to your vehicle's system. compatible with: Carbon Series (All Products) RP Hyperspot Utility-50 with warning light Utility-50 with red taillight Utility-80 HD (with variable brightness) Please note that the corresponding Lazer single and dual lamp wiring kits for the Utility-80 HD with variable brightness require customers to provide their own switching method to adjust the brightness up/down.

Read more less

The amber lenses for Lazer Triple-R lights change the light color of your headlights from neutral white (5000 K) to a selective yellow – ideal for better visibility in rain, fog, or snow. You have the choice between a flat (0°) or fluted (15°) design, depending on whether you want to additionally widen the beam angle. The lenses are made of robust acrylic and are equipped with a seal that prevents the ingress of water and dust. Four spring clips are included for mounting, allowing you to quickly and securely attach the lenses to your light.

Read more less

For a clean and high-quality retrofit of auxiliary lights, Lazer Lamps offers the vehicle-specific grille integration kit for the VW T6 Startline . Thanks to specially developed mounting brackets, the powerful LED headlights can be quickly and precisely installed in the vehicle's original grille. The integration is so discreet that the Grenadier's original design is fully preserved – ideal for those who value a factory-like appearance . In addition to the headlights, the kit includes the matching wiring harness and precision-machined mounting brackets that are optimally adapted to the Standard grille. In combination with the included self-tapping plastic screws, a stable and theft-proof installation is guaranteed. Made from a UV-stable and weatherproof composite material , the brackets guarantee long-lasting and reliable fastening – even under extreme operating conditions. For easy and precise installation, the set includes a cutting template for an exact fit , which makes installation much easier. Maximum light output, discreet appearance and lasting durability – perfectly matched to the VW T6 Startline.

Read more less