Accessories

The Lazer single lamp bracket is a universal mounting kit for LED auxiliary lights, specifically designed for use in motorsport. It reliably distributes the load generated over a larger area of the vehicle, ensuring maximum stability – even at high speeds or during extreme vibrations. The bracket is fully adjustable and can be flexibly mounted on almost any vehicle type. Thanks to the integrated threaded rods, the tilt angle of the light beam can be precisely adjusted – ideal for hood-mounted lights or cornering lights where exact alignment is crucial.

Read more less

The universal roof mounting kit from Lazer Lamps is the ideal solution for securely installing LED light bars with a length between 990 mm and 1320 mm. The robust A2 stainless steel brackets are supplied with high-quality anti-theft components and allow for flexible mounting – either directly on the roof or on the roof rail. By choosing different bracket heights, the system is suitable for almost any vehicle design, with or without rails. The powder-coated brackets are UV-stable, completely corrosion-resistant, and meet the strict quality standards of the automotive industry. Recessed anti-theft screws in lengths from 20 mm to 80 mm, as well as cylindrical spacers in various sizes, ensure precise and secure positioning of the light bar. The attachment is made with black rivets, which not only provide stability but also blend discreetly into the vehicle's lines. Suitable cable grommets are included for professional cable routing – ideal for routing through the rail or directly into the roof and interior. A VHB cleaning cloth for preparing adhesive surfaces and electrical butt connectors for a tight, secure cable connection are also included in the scope of delivery. Note: Lights and wiring harnesses are sold separately. A single-lamp wiring harness is already included with the following models: Linear-42 Elite, Triple-R 24 Elite, and Triple-R 24 Elite+.

Read more less

Lazer Lamps' universal roof mounting kits offer you a reliable and flexible solution for installing LED light bars with a length between 990 mm and 1320 mm – whether your vehicle has a roof rail or not. The mounts are available in various heights, allowing for a custom-fit and discreet integration. Not suitable for vehicles with panoramic roofs or glossy roof rails – for these cases, we recommend our special integration kits. Made from A2 stainless steel and finished with a UV-stable, black satin powder coating, the mounts are fully corrosion-resistant and meet the highest automotive standards. The anti-theft screws included in the set, in various lengths (20 mm to 80 mm), provide additional security. Cylindrical spacers in multiple lengths are included for precise positioning of the light. Depending on the application, mounting is either directly on the roof (with only 25 mm bracket width) or on the roof rail – each with black rivets for a secure, inconspicuous installation. The supplied cable glands ensure clean cable routing, allowing for tight installation through the rail or vehicle roof. Also included: a VHB cleaning cloth for preparing sealing surfaces and butt connectors for the professional reconnection of cables after routing them into the vehicle interior. Important: In vehicles with a standard LED matrix headlight system, the high beam signal may not be detected when the ECE-approved Linear-42 is to be coupled with the high beam. In this case, an addition to the wiring with a Lazer CAN bus interface is required. Note: Lights and wiring kits are sold separately. A single-lamp wiring kit is already included with the following models: Linear-42 Elite, Triple-R 24 Elite and Triple-R 24 Elite+.

Read more less

Lazer Lamps universal roof mounting kits offer you a reliable and flexible solution for installing LED light bars with a length between 990mm and 1320mm – regardless of whether your vehicle has roof rails or not. The brackets are available in various heights, allowing for a precise and discreet integration. Not suitable for vehicles with panoramic roofs or shiny roof rails – for these cases, we recommend our special integration kits. Made from A2 stainless steel and finished with a UV-stable, satin black powder coating, the brackets are completely corrosion-resistant and meet the highest automotive standards. The anti-theft screws included in the set, in various lengths (20mm to 80mm), provide additional security. Cylindrical spacers in several lengths are supplied for precise positioning of the light. Depending on the application, mounting is either directly on the roof (with only 25mm bracket width) or on the roof rail – each with black rivets for a secure, inconspicuous installation. The supplied cable glands ensure clean cable routing, allowing for tight installation through the rail or vehicle roof. Also included: a VHB cleaning cloth for preparing sealing surfaces and butt connectors for professionally reconnecting the cables after routing them into the vehicle interior. Important: In vehicles with a standard LED matrix headlight system, the high beam signal may not be detected when the ECE-approved Linear-42 is to be coupled with the high beam. In this case, an Lazer CAN-Bus interface will need to be added to the wiring. Note: Lights and wiring kits are sold separately. A one-lamp wiring kit is already included with the following models: Linear-42 Elite, Triple-R 24 Elite and Triple-R 24 Elite+.

Read more less

Lazer Lamps' universal roof mounting kits offer you a robust and flexible solution for installing LED light bars with a length of 990 mm to 1320 mm. The brackets, made of high-quality A2 stainless steel, are available in various heights and are suitable for vehicles with and without roof rails. This ensures a precise, discreet, and secure mounting – without compromise. Thanks to their UV-stable, black satin powder coating, the brackets are completely corrosion-resistant and meet the high quality requirements of the automotive industry. For additional theft protection, recessed anti-theft screws in various lengths (20 mm to 80 mm) are included in the kit. Furthermore, cylindrical spacers in multiple lengths ensure optimal positioning of your light bars. Depending on the version, attachment to the vehicle is either directly to the roof (with a bracket width of only 25 mm) or to the roof rail – with black rivets that are not only stable but also visually unobtrusive. Cable glands are included for clean and sealed cable routing, which you can insert either into the roof rail or directly through the roof into the interior. A VHB cleaning cloth for sealing surfaces and electrical butt connectors for secure cable connection complete the comprehensive kit. Note: Lights and wiring harnesses are sold separately. For the Linear-48 Elite and the Triple-R 28 Elite, a single-lamp wiring harness is already included with the light.

Read more less

Lazer Lamps' universal roof mounting kits offer a well-engineered solution for the easy and secure installation of LED light bars with a length between 990 mm and 1320 mm. The brackets are available in different heights, making them suitable for vehicles with and without roof rails. Made from high-quality A2 stainless steel and finished with a UV-stable, black satin powder coating, the mounts are completely corrosion-resistant and meet the high quality standards of the automotive industry. The scope of delivery includes recessed anti-theft screws in various lengths (20–80 mm) as well as cylindrical spacers, which facilitate the positioning of your light bars. Mounting can be done either directly on the roof (bracket width of only 25 mm) or on the roof rail – each with black rivets that ensure a secure and discreet attachment. The included cable glands allow for a clean, watertight cable entry through the rail or roof into the interior. A VHB cleaning cloth for preparing the adhesive surfaces and electrical butt connectors for restoring the cable connection after routing are also included in the set. Note: Lights and wiring are sold separately. A one-lamp wiring kit is already included with the following models: Linear-36 Elite and T24 Evolution.

Read more less

The amber lenses for Lazer Triple-R lights change the light color of your headlamps from neutral white (5000 K) to selective yellow – ideal for rain, fog, or snow. The light color ensures fewer reflections and better visibility in difficult weather conditions. You can choose between a flat (0°) or ribbed (15°) version: while the flat cover leaves the light pattern unchanged, the ribbed lens widens the beam angle and improves illumination. Made from durable acrylic and equipped with an all-round seal, the lens reliably protects against water and dust. Installation is tool-free with the four spring clips included in the delivery.

Read more less

The fluted lens for Lazer Triple-R and ST Evolution lights expands the beam, providing wider illumination – ideal when combining multiple lights. It helps to avoid dark transitions in the light pattern and significantly improves overall illumination depending on the application and installation situation. The lens is made of high-quality acrylic and is equipped with an integrated seal that prevents the ingress of water and dust. It is secured with four included spring clips, which allow the lens to be mounted quickly and securely on the light.

Read more less

With the amber lenses for the Lazer ST4 Evolution lights, you can change the standard color temperature from 5000 Kelvin to selective yellow – perfect for improved visibility in rain, fog, or snowfall. The lenses are available as either flat (0°) or grooved (15°) versions. While the flat version does not affect the light pattern, the grooved lens widens your headlight's beam angle. Made from robust acrylic and featuring an all-around seal, the lenses reliably protect against water and dust. Installation is tool-free using the four supplied spring clips – quick, secure, and precise.

Read more less

Lazer Lamps' neoprene protective covers reliably shield your Triple-R and Linear series LED light bars from dirt, weather, and damage – ideal for times when the lights are not in use. Made from high-quality, impact-resistant, and washable neoprene, the covers not only offer optimal protection but also a durable, perfectly fitting solution. Thanks to robust hook-and-loop fasteners, the covers can be attached or removed quickly and easily. An additional benefit: the covers noticeably reduce wind noise, which can often occur with light bars mounted above the windshield. Important: Do not use the neoprene cover while the lights are switched on or powered.

Read more less

Lazer Lamps neoprene protective covers reliably shield your Triple-R and Linear series LED light bars from dirt, weather, and damage – ideal for times when the lights are not in use. Made from high-quality, impact-resistant, and washable neoprene, the covers not only offer optimal protection but also a durable, perfectly fitting solution. Thanks to robust hook-and-loop fasteners, the covers can be attached or removed quickly and easily. An additional benefit: the covers noticeably reduce wind noise, which can often occur with light bars mounted above the windshield. Important: Do not use the neoprene cover while the lights are switched on or powered.

Read more less

Lazer Lamps' neoprene protective covers reliably shield your Triple-R and Linear series LED light bars from dirt, weather, and damage – ideal for times when the lights are not in use. Made from high-quality, impact-resistant, and washable neoprene, the covers not only offer optimal protection but also a durable, custom-fit solution. Thanks to robust hook-and-loop fasteners, the covers can be attached or removed quickly and easily. An additional benefit: the covers noticeably reduce wind noise, which can often occur with light bars mounted above the windshield. Important: Do not use the neoprene cover while the lamps are switched on or powered.

Read more less

Lazer's single lamp wiring harness is specially designed for the Linear-18 Elite+, allowing for easy, safe, and reliable installation of your high-performance LED light. Thanks to the 3-pin Aptiv connector, the connection is quickly established – without any configuration. The kit includes a 12V relay in a waterproof housing, a fuse, a battery clamp, and 2m of flex cable for connecting to the light. This allows you to operate the headlight either in parallel with the standard vehicle lighting or independently via a switch in the interior. All Lazer lights come with a pre-assembled socket that connects directly to the plug of this wiring harness – for uncomplicated integration into your vehicle. Compatible with: Linear-18 Elite+ Note: The light mentioned above is already supplied ex-works with this single lamp wiring harness.

Read more less

The 2-pin Y-splitter with Superseal connectors is the ideal solution for efficiently wiring multiple low-power Lazer lights – without additional parallel wiring harnesses. Perfectly suited for setups with three or more lights, where each lamp consumes 75W or less and no special 4-lamp wiring harness is available. Thanks to the IP68-certified Superseal connectors, the Y-splitter can be integrated securely and weatherproof. All Lazer lights come pre-wired with a socket that connects directly to the lamp wiring harness plug or this splitter – for simple and clean installation. Compatible with: ST2 ST4 ST6 Triple-R 750 Wide / Elite Triple-R 850 Elite Linear-6 Standard / Elite Linear-12 Standard / Elite Sentinel 7'' Standard (Non-PL) Important: The maximum total current draw must not exceed 14A.

Read more less

For use with 24V vehicle systems, Lazer offers the suitable 4-pin 24V relay as a direct replacement for the standard 12V relay. It simply plugs into the existing relay socket and is fully compatible with all current Lazer wiring harness kits. Like its 12V counterpart, the 24V relay is housed in a robust, waterproof enclosure – for a safe, durable and maintenance-free electrical installation under all operating conditions.

Read more less

Lazer pipe clamps offer you a simple, stable and visually appealing solution for mounting your Lazer high-performance LED lights on horizontal pipes – ideal for roll bars, roof racks or bull bars. Made from high-quality stainless steel and with an electropolished matt finish, the clamps impress with maximum durability and corrosion resistance. For the 42 mm and 60 mm sizes, the Lazer logo is also subtly engraved on the front – a stylish detail that perfectly matches the premium design of Lazer products. The clamps are compatible with all Lazer high-performance LED lights and allow for quick, secure mounting without much effort.

Read more less

Lazer pipe clamps offer you a simple, stable, and visually appealing solution for mounting your Lazer high-performance LED lights on horizontal pipes – ideal for roll bars, roof racks, or bull bars. Made from high-quality stainless steel and featuring an electropolished matte finish, these clamps impress with maximum durability and corrosion resistance. For the 42 mm and 60 mm sizes, the Lazer logo is also subtly engraved on the front – a stylish detail that perfectly matches the premium design of Lazer products. The clamps are compatible with all Lazer high-performance LED lights and allow for quick, secure mounting without much effort.

Read more less

Lazer Tube Clamps offer you a simple, stable, and visually appealing solution for mounting your Lazer high-performance LED lights on horizontal tubes – ideal for roll bars, roof racks, or bull bars. Made from high-quality stainless steel and finished with an electro-polished matte finish, the clamps impress with maximum durability and corrosion resistance. For sizes 42 mm and 60 mm, the Lazer logo is also subtly engraved on the front – a stylish detail that perfectly matches the premium design of Lazer products. The clamps are compatible with all Lazer high-performance LED lights and allow for quick, secure mounting without much effort.

Read more less

The lens covers for Lazer Sentinel lights offer you an easy way to visually enhance and protect your headlights. Made from robust polycarbonate, the covers can be mounted securely and precisely. Depending on the version, they provide a new design or change the light characteristics. Particularly practical: The yellow cover converts the light's color temperature into selective yellow – ideal for better visibility in poor weather conditions such as fog, rain, or snow.

Read more less

The lens covers for the Lazer Sentinel lights offer you a simple way to visually enhance and protect your headlights at the same time. Made from robust polycarbonate, the covers can be mounted securely and with a precise fit. Depending on the version, they provide a new design or change the light characteristics. Particularly practical: The yellow cover converts the color temperature of the light into selective yellow – ideal for better visibility in poor weather conditions such as fog, rain, or snow.

Read more less

The amber lenses for the Lazer Triple-R lights change the light color of your headlamps from neutral white (5000 K) to selective yellow – ideal for better visibility in rain, fog, or snow. You can choose between a flat (0°) or grooved (15°) version, depending on whether you want to additionally widen the beam angle. The lenses are made of robust acrylic and are equipped with a seal that prevents the ingress of water and dust. Four spring clips are included for mounting, with which you can quickly and securely attach the lenses to your light.

Read more less

The fluted lens for the Lazer ST Evolution provides a wider beam of light and prevents dark transitions when multiple lights are used together – depending on the vehicle and application. It is made of high-quality acrylic and features an all-round seal that reliably protects against water and dust. Installation is tool-free using the four supplied spring clips, ensuring the lens sits securely and precisely on the light.

Read more less

The ribbed lens for the Lazer Triple-R and ST Evolution expands the beam angle of your LED auxiliary headlights and ensures even light distribution – ideal if you are using multiple lamps in combination. Depending on your setup, this effectively avoids dark zones in the light pattern. Made from robust acrylic and equipped with an integrated seal, the lens reliably protects against the ingress of water and dust. Installation is straightforward: the lens can be securely and precisely attached to the light with the four included spring clips.

Read more less

The lens covers for the Lazer Sentinel lights offer you an easy way to visually customize your headlights or provide additional protection. Made from durable polycarbonate, the covers can be precisely and securely mounted. In addition to providing extra protection, the yellow lens cover gives the light a selective yellow color temperature – ideal for better visibility in rain, fog, or snow and for a striking appearance for your vehicle.

Read more less