Accessories

Der mittlere Montagehalter von Lazer ist die ideale Lösung für eine zentrale und besonders kompakte Befestigung deiner Triple-R oder ST/T Hochleistungs-LED-Leuchten. Das Kit kombiniert A2-Edelstahlbeschläge mit extrem widerstandsfähigen Gehäusen aus glasfaserverstärktem Nylon (PA66 GF30) – für maximale Stabilität bei minimalem Gewicht. Die Halterung wird mithilfe von M5-Madenschrauben direkt in die seitlichen Montagekanäle der Leuchte eingesetzt und lässt sich sowohl oberhalb als auch unterhalb der Lampe anbringen. Für maximale Flexibilität kann die Ausrichtung der Halterung umgekehrt werden, sodass du die Position der Leuchte relativ zum Fahrzeugmontagepunkt weiter nach vorne oder hinten verschieben kannst. Geeignet für alle Leuchten der Triple-R- und ST/T-Serie.

Read more less

Der Linear Mittelmontagehalter von Lazer bietet dir eine kompakte, robuste Lösung zur Befestigung deiner Linear LED-Leuchte – ideal für mittige Einzelmontagen. Das Kit kombiniert A2-Edelstahlbeschläge mit extrem widerstandsfähigen Gehäusen aus glasfaserverstärktem Nylon (PA66 GF30), das höchste Belastungen und Umwelteinflüsse mühelos standhält. Die Halterung wird direkt in den Kanal auf der Rückseite des Linear-Kühlkörpers eingeführt und mithilfe von M5-Madenschrauben sicher fixiert. Für maximale Flexibilität lässt sich die Ausrichtung der Halterung umkehren, sodass du die Leuchte entweder nach oben gerichtet oder hängend unterhalb des Montagepunkts installieren kannst. Zusätzlich verfügt die Halterung über integrierte Verdrehschutzmerkmale für eine dauerhaft stabile Ausrichtung. Hinweis: Nur zur Verwendung mit Linear-Produkten geeignet.

Read more less

Our anti-theft kit offers customers the option of securing their products with additional theft protection, providing peace of mind. This A2 stainless steel security screw set is specifically designed and recommended for use with Sentinel lights (slim or wide mounting kit). The kit includes security bits for the side brackets and locking nuts for the M10 carriage bolts that secure the bracket to your vehicle.

Read more less

The Sentinel Mounting Bracket Kit consists of a 2mm thick stainless steel stabilizing arm in two parts that fits the Lazer Lamps range of Sentinel LED lights. The stabilizing arm attaches to the light with the included bracket before being secured to an additional rigid mounting point on your vehicle, reducing vibration, stress, and movement that can affect some lighting installations. Suitable for a single linear light. Length: 130mm - 230mm

Read more less

The 3m cable extension kit is ideal for custom designs and installations that require additional wiring to the luminaires. It includes IP68 connectors on both ends. All Lazer lamps are sold with a pre-assembled female connector that connects to the male connector of the lamp wiring harness to facilitate wiring into your vehicle's system. compatible with: T-16 Evolution T-24 Evolution T-28 Evolution Triple-R 16 Elite Triple-R 24 Elite Triple-R 28 Elite

Read more less

The 3m cable extension kit is ideal for custom designs and installations that require additional wiring to the luminaires. It includes IP68 connectors on both ends. All Lazer lamps are sold with a pre-assembled female connector that connects to the male connector of the lamp wiring harness to facilitate wiring into your vehicle's system. compatible with: Triple-R 1000 (with Beacon function)

Read more less

Two-lamp wiring kit for Lazer Lamps high-performance LED headlights. Setup is quick, easy, and reliable thanks to the 4-pin Deutsch DT connector, requiring no configuration. The kit features a 12V relay (in a waterproof housing), a fuse, a battery clamp at one end, and 2m of flex cable on the headlight cable. It allows you to operate Lazer products either in parallel with the vehicle's Standard lighting and/or via an independent switch that can be mounted in your vehicle. All Lazer lamps are sold with a pre-wired socket that connects to the lamp harness connector to facilitate wiring to your vehicle's system. compatible with: Carbon Series (All Products) RP Hyperspot Utility-50 with warning light Utility-50 with red taillight Utility-80 HD (with variable brightness) Please note that the corresponding Lazer single and dual lamp wiring kits for the Utility-80 HD Variable require customers to provide their own switching method to adjust the brightness up/down.

Read more less

Single-lamp wiring kit for Lazer Lamps high-performance LED headlights. Setup is quick, easy, and reliable thanks to the 4-pin Deutsch connector, requiring no configuration. The kit features a 12V relay (in a waterproof housing), a fuse, a battery clamp at one end, and 2m of flex cable on the headlight cable. It allows you to operate Lazer products either in parallel with the vehicle's Standard lighting and/or via an independent switch that can be mounted in your vehicle. All Lazer lamps are sold with a pre-wired socket that connects to the lamp harness connector to facilitate wiring to your vehicle's system. compatible with: Carbon Series (All Products) RP Hyperspot Utility-50 with warning light Utility-50 with red taillight Utility-80 HD (with variable brightness) Please note that the corresponding Lazer single and dual lamp wiring kits for the Utility-80 HD with variable brightness require customers to provide their own switching method to adjust the brightness up/down.

Read more less

Two-lamp wiring kit for Lazer Lamps high-performance LED headlights. Setup is quick, easy, and reliable thanks to the 2-pin Superseal connector, requiring no configuration. The kit features a 12V relay (in a waterproof housing), a fuse, a battery clamp at one end, and 3.2 m of flex cable on the headlight cable. It allows you to operate Lazer products either in parallel with the vehicle's Standard lighting and/or via an independent switch that can be mounted in your vehicle. All Lazer lamps are sold with a pre-wired socket that connects to the lamp harness connector to facilitate wiring to your vehicle's system. compatible with: ST Evolution (All Products) Triple-R 750 Elite Triple-R 850 Elite Triple-R 1000 Elite Linear-6 (Standard / Elite) Linear-12 (Standard / Elite) Linear-18 (Standard) Sentinel 7'' Not suitable for: 2x Linear-18 Elite or 2x Sentinel 9'' Elite. To power two of these lights, please use the two-lamp "Medium Power" wiring kit (2L-MP-120).

Read more less

Two-lamp wiring kit for Lazer Lamps high-performance LED headlights. Setup is quick, easy, and reliable thanks to the 2-pin Deutsch DT connector, requiring no configuration. The kit features a 12V relay (in a waterproof housing), a fuse, a battery clamp at one end, and 2m of flex cable on the headlight cable. It allows you to operate Lazer products either in parallel with the vehicle's Standard lighting and/or via an independent switch that can be mounted in your vehicle. All Lazer lamps are sold with a pre-wired socket that connects to the lamp harness connector to facilitate wiring to your vehicle's system. compatible with: Linear-24 Flood Utility-25 Utility-25 MAXX Utility-45 Utility-50 Utility-80 HD (heavy duty) RP Spot

Read more less

Single-lamp wiring kit for Lazer Lamps high-performance LED headlights. Setup is quick, easy, and reliable thanks to the 2-pin Econoseal connector, requiring no configuration. The kit features a 12V relay (in a waterproof housing), a fuse, a battery clamp at one end, and 3m of flex cable on the headlight cable. It allows Lazer products to be operated either in parallel with the vehicle's Standard lighting and/or via an independent switch that can be mounted in your vehicle. All Lazer lamps are sold with a pre-wired socket that connects to the lamp harness connector to facilitate wiring to your vehicle's system. compatible with: T16 Evolution T24 Evolution T28 Evolution Triple-R 16 Elite Triple-R 24 Elite Triple-R 28 Elite Triple-R 1250 Elite+ Note: All above lamps are supplied as new, including the individual lamp wiring kit.

Read more less

The mounting bracket kit consists of a 2mm thick, black-coated stainless steel stabilizing arm, made from two pieces and designed to fit the Lazer Lamps range of Triple-R or ST Evolution LED lights. The stabilizing arm attaches to the light with the included low-profile bracket before being secured to an additional rigid mounting point on your vehicle, reducing vibration, stress, and movement that can affect some lighting installations. Length: 130mm - 230mm

Read more less

Single-lamp wiring kit for Lazer Lamps high-performance LED headlights. Setup is quick, easy, and reliable thanks to the 2-pin Superseal connector, requiring no configuration. The kit features a 12V relay (in a waterproof housing), a fuse, a battery clamp at one end, and 3m of flex cable on the headlight cable. It allows you to operate Lazer products either in parallel with the vehicle's Standard lighting and/or via an independent switch that can be mounted in your vehicle. All Lazer lamps are sold with a pre-wired socket that connects to the lamp harness connector to facilitate wiring to your vehicle's system. compatible with: ST Evolution (All Products) Triple-R 750 Elite (Gen2) Triple-R 850 Elite (Gen2) Triple-R 1000 Elite (Gen2) Linear-6 (Standard / Elite) Linear-12 (Standard / Elite) Linear-18 (Standard / Elite) Linear-36 Linear-42 Linear-48 Sentinel 7'' Sentinel 9'' Elite

Read more less

Single-lamp wiring kit for Lazer Lamps high-performance LED headlights. Setup is quick, easy, and reliable thanks to the 2-pin Deutsch connector, requiring no configuration. The kit features a 12V relay (in a waterproof housing), a fuse, a battery clamp at one end, and 5m of flex cable on the headlight cable. It allows you to operate Lazer products either in parallel with the vehicle's Standard lighting and/or via an independent switch that can be mounted in your vehicle. All Lazer lamps are sold with a pre-wired socket that connects to the lamp harness connector to facilitate wiring to your vehicle's system. compatible with: Linear-24 Flood Utility-25 Utility-25 MAXX Utility-45 Utility-50 Utility-80 HD (heavy duty) RP Spot

Read more less

Two-lamp wiring kit for Lazer Lamps high-performance LED headlights. Setup is quick, easy, and reliable thanks to the 3-pin Superseal connector, requiring no configuration. The kit features a 12V relay (in a waterproof housing), a fuse, a battery clamp at one end, and 1.2m of flex cable on the headlight cable. It allows you to operate Lazer products either in parallel with the vehicle's Standard lighting and/or via an independent switch that can be mounted in your vehicle. All Lazer lamps are sold with a pre-wired socket that connects to the lamp harness connector to facilitate wiring to your vehicle's system. compatible with: Air-130 Elite Sentinel 9'' Elite (with parking light) Sentinel 9'' Highline (with parking light) Linear-18 Elite (with parking light) Triple-R 1250

Read more less

Two-lamp wiring kit for Lazer Lamps high-performance LED headlights. Setup is quick, easy, and reliable thanks to the 2-pin Superseal connector, requiring no configuration. The kit features a 12V relay (in a waterproof housing), a fuse, a battery clamp at one end, and 1.2m of flex cable on the headlight cable. It allows you to operate Lazer products either in parallel with the vehicle's Standard lighting and/or via an independent switch that can be mounted in your vehicle. All Lazer lamps are sold with a pre-wired socket that connects to the lamp harness connector to facilitate wiring to your vehicle's system. compatible with: Sentinel 9'' Elite Linear-18 Elite

Read more less

Two-lamp wiring kit for Lazer Lamps high-performance LED headlights. Setup is quick, easy, and reliable thanks to the 3-pin Superseal connector, requiring no configuration. The kit features a 12V relay (in a waterproof housing), a fuse, a battery clamp at one end, and 1.2m of flex cable on the headlight cable. It allows Lazer products to be operated either in parallel with the vehicle's Standard lighting and/or via an independent switch that can be mounted in your vehicle. It includes a push button for easy operation of the light modes. All Lazer lamps are sold with a pre-wired socket that connects to the lamp harness connector to facilitate wiring to your vehicle's system. compatible with: Linear-6 Elite+

Read more less

Single-lamp wiring kit for Lazer Lamps high-performance LED headlights. Setup is quick, easy, and reliable thanks to the 3-pin Superseal connector, requiring no configuration. Featuring a 12V relay (in a waterproof housing), a fuse, a battery clamp at one end, and 1.2m of flex cable on the headlight cable, the kit allows Lazer products to be operated either in parallel with the vehicle's Standard lighting and/or via an independent switch that can be mounted in your vehicle. Includes a push-button switch for easy operation of the light modes. All Lazer lamps are sold with a pre-wired socket that connects to the lamp harness connector to facilitate wiring to your vehicle's system. compatible with: Linear-6 Elite+

Read more less

The Linear Anti-Theft Side Mount Kit offers customers the security of mounting products with added protection against theft. The stainless steel brackets are pre-treated for maximum corrosion resistance and then powder-coated black. The included fasteners are all made of A2 stainless steel and feature a unique security key for securing both the lights to the brackets and the brackets to the vehicle. The orientation of the bracket can be changed to raise/lower the light <13mm relative to the vehicle mounting point. Only suitable for linear luminaires.

Read more less

The Linear Fixing Bracket Kit consists of a 2mm thick stainless steel stabilizing arm, made from two pieces, designed to fit the Lazer Lamps range of Linear LED lights. The stabilizing arm attaches to the light with the included bracket before being secured to an additional rigid mounting point on your vehicle, reducing vibration, stress, and movement that can affect some lighting installations. Suitable for a single Linear light. Length: 130mm - 230mm

Read more less

Two-lamp wiring kit for Lazer Lamps high-performance LED headlights. Setup is quick, easy, and reliable thanks to the 2-pin Superseal connector, requiring no configuration. The kit features a 12V relay (in a waterproof housing), a fuse, a battery clamp at one end, and 1.2m of flex cable on the headlight cable. It allows you to operate Lazer products either in parallel with the vehicle's Standard lighting and/or via an independent switch that can be mounted in your vehicle. All Lazer lamps are sold with a pre-wired socket that connects to the lamp harness connector to facilitate wiring to your vehicle's system. compatible with: ST Evolution (All Products) Triple-R 750 Elite Triple-R 850 Elite Triple-R 1000 Elite Linear-6 (Standard / Elite) Linear-12 (Standard / Elite) Linear-18 (Standard) Sentinel 7'' Not suitable for: 2x Linear-18 Elite or 2x Sentinel 9'' Elite. To power two of these lights, please use the two-lamp "Medium Power" wiring kit (2L-MP-120).

Read more less

Single-lamp wiring kit for Lazer Lamps high-performance LED headlights. Setup is quick, easy, and reliable thanks to the 2-pin Superseal connector, requiring no configuration. The kit features a 12V relay (in a waterproof housing), a fuse, a battery clamp at one end, and 1.2m of flex cable on the headlight cable. It allows you to operate Lazer products either in parallel with the vehicle's Standard lighting and/or via an independent switch that can be mounted in your vehicle. All Lazer lamps are sold with a pre-wired socket that connects to the lamp harness connector to facilitate wiring to your vehicle's system. compatible with: Glide Glide Elite ST Evolution (All Products) Triple-R 750 Elite (Gen2) Triple-R 850 Elite (Gen2) Triple-R 1000 Elite (Gen2) Linear-6 (Standard / Elite) Linear-12 (Standard / Elite) Linear-18 (Standard / Elite) Linear-36 Linear-42 Linear-48 Sentinel 7'' Sentinel 9'' Elite

Read more less

The Glide Stabilizer Bar Kit consists of a two-piece 2 mm A2 stainless steel stabilizing arm that fits the Lazer Lamps Glide LED light bar range. The stabilizing arm attaches to the back of the lamp through a pre-drilled threaded hole, reducing vibration, stress, and movement that can affect some lighting installations. Suitable for a single Glide LED light bar.

Read more less

Glide's Side Mount Anti-Theft Kit offers customers added security when mounting products with added theft protection. The brackets are constructed from pre-treated stainless steel for maximum corrosion protection and then powder-coated black. The included fasteners are all made of stainless steel and feature a unique locking key for both securing the lights to the brackets and securing the brackets to the vehicle. The orientation of the bracket can be changed to raise/lower the light by less than 13 mm relative to the vehicle mounting point.

Read more less