Lazer Lamps

Through continuous improvement and the introduction of the latest and most efficient LED technology, the highly versatile Utility Series sets itself apart from other work light solutions. The product range includes high-performance 45- and 80-watt spotlights, as well as smaller 25- and 45-watt Work Lights that are equally impressive in performance and reliability, but better suited to the needs of 4WD, light commercial vehicles, and heavy-duty trucks. Each luminaire in the range consists of four high-density LEDs that deliver their light output through a highly reflective, vacuum-metallized optic. This was designed and developed in the UK using advanced CAD design and lighting simulation software. The result: symmetrical light distribution over a wider area provides greater brightness and—because the LEDs are carefully selected for their color temperature—proven maximum clarity with less fatigue and strain that can occur when using higher color ranges. The light output is even more impressive considering the comparatively small dimensions of the spotlights. The consistently high light output is ensured by an innovative CAE-optimized "matrix" cooling system. The increased surface area ensures that the heat generated during operation is dissipated from the unit more efficiently. This process allows for maximum light output for longer. At the same time, the electronic thermal management system optimizes light output based on the ambient and thermal conditions of the luminaire. The Utility Series is a product range designed for long life and withstands even the harshest environmental conditions. The hard-coated polycarbonate lens is bonded to ensure water resistance and backs up the comprehensive 5-year warranty*. The luminaires have been extensively tested to meet EU regulations regarding shock, vibration, and corrosion resistance. In addition to the extremely robust construction, the advanced electronic design ensures full EMC protection according to CISPR-25 (Class 3)†. Featuring Deutsch male/female connectors (Part No. DT06-2S/DT04-2P), the heavy-duty Utility-45/80 are also available with a choice of wide or slim mounts and the option for ADR-compliant versions (UT-45/80 only). * – 5-year warranty applies to use in passenger cars and commercial fleets, for all other applications a 2-year warranty applies. † – CISPR-25 (Class 3) applies only to 12 V use unless otherwise specified.

Read more less

Through continuous improvement and the introduction of the latest and most efficient LED technology, the highly versatile Utility Series sets itself apart from other work light solutions. The product range includes high-performance 45- and 80-watt spotlights, as well as smaller 25- and 45-watt Work Lights that are equally impressive in performance and reliability, but better suited to the needs of 4WD, light commercial vehicles, and heavy-duty trucks. Each luminaire in the range consists of four high-density LEDs that deliver their light output through a highly reflective, vacuum-metallized optic. This was designed and developed in the UK using advanced CAD design and lighting simulation software. The result: symmetrical light distribution over a wider area provides greater brightness and—because the LEDs are carefully selected for their color temperature—proven maximum clarity with less fatigue and strain that can occur when using higher color ranges. The light output is even more impressive considering the comparatively small dimensions of the spotlights. The consistently high light output is ensured by an innovative CAE-optimized "matrix" cooling system. The increased surface area ensures that the heat generated during operation is dissipated from the unit more efficiently. This process allows for maximum light output for longer. At the same time, the electronic thermal management system optimizes light output based on the ambient and thermal conditions of the luminaire. The Utility Series is a product range designed for long life and withstands even the harshest environmental conditions. The hard-coated polycarbonate lens is bonded to ensure water resistance and backs up the comprehensive 5-year warranty*. The luminaires have been extensively tested to meet EU regulations regarding shock, vibration, and corrosion resistance. In addition to the extremely robust construction, the advanced electronic design ensures full EMC protection according to CISPR-25 (Class 3)†. Featuring Deutsch male/female connectors (Part No. DT06-2S/DT04-2P), the heavy-duty Utility-45/80 are also available with a choice of wide or slim mounts and the option for ADR-compliant versions (UT-45/80 only). * – 5-year warranty applies to use in passenger cars and commercial fleets, for all other applications a 2-year warranty applies. † – CISPR-25 (Class 3) applies only to 12 V use unless otherwise specified.

Read more less

Balancing form and function, the Utility-50 is a medium-duty LED work light that delivers performance, style, durability, and functionality. At its core are four high-performance 13W premium-bin LEDs, delivering high illuminance levels suitable for a wide range of applications and vehicle and machine types. The carefully selected 5000K color temperature contributes to the definition of the light output, which is both powerful and comfortable for extended periods of use. Its high CRI (color rendering index) is proven to optimize sharpness and definition between shapes and colors. The Utility-50 delivers more than just a powerful work light. A version of the Utility-50 is available with an integrated red taillight function. Approved according to UNECE Regulation 148-R1, the red taillight features four contour markers in each corner of the lamp, creating a unique and stylish appearance in addition to its safety benefits. Additionally, a version of the lamp with an integrated amber flashing warning light function is available, approved according to UNECE Regulation 65, with or without the aforementioned red taillight function. With frontal dimensions shared with the Utility-80 HD, 107 mm (h) x 107 mm (w), this gives an indication of the lamp's lighting prowess, while the reduced depth of the lamp facilitates installation. This reduction in overall size does not come at the expense of performance, however, as the lamp has been carefully designed and engineered in-house in the UK to optimize light output while taking thermal conductivity into account, which is crucial for the lamp's longevity and trouble-free operation for many years. The strength and reliability of the Utility-50 are further enhanced by additional design features and build quality, a result of our UK-based manufacturing, including: an unbreakable polycarbonate lens with a hard coating, EMC protection - CISPR:25 (Class 3 or 5 available), automotive-grade corrosion resistance through our in-house pre-treatment and powder coating facility, and IP68 and IP69K rating. All of this is backed by our comprehensive 5-year warranty (2 years for non-automotive/industrial applications). Depending on the model selected, the Utility-50 comes with male/female Deutsch connectors. The Utility-50 also comes with a satin black painted stainless steel mounting system, either with loose M10 bolts and fasteners or fixed M10 bolts and fasteners, the latter simplifying installation in some cases.

Read more less

Balancing form and function, the Utility-50 is a medium-duty LED work light that delivers performance, style, durability, and functionality. At its core are four high-performance 13W premium-bin LEDs, delivering high illuminance levels suitable for a wide range of applications and vehicle and machine types. The carefully selected 5000K color temperature contributes to the definition of the light output, which is both powerful and comfortable for extended periods of use. Its high CRI (color rendering index) is proven to optimize sharpness and definition between shapes and colors. The Utility-50 delivers more than just a powerful work light. A version of the Utility-50 is available with an integrated red taillight function. Approved according to UNECE Regulation 148-R1, the red taillight features four contour markers in each corner of the lamp, creating a unique and stylish appearance in addition to its safety benefits. Additionally, a version of the lamp with an integrated amber flashing warning light function is available, approved according to UNECE Regulation 65, with or without the aforementioned red taillight function. With frontal dimensions shared with the Utility-80 HD, 107 mm (h) x 107 mm (w), this gives an indication of the lamp's lighting prowess, while the reduced depth of the lamp facilitates installation. This reduction in overall size does not come at the expense of performance, however, as the lamp has been carefully designed and engineered in-house in the UK to optimize light output while taking thermal conductivity into account, which is crucial for the lamp's longevity and trouble-free operation for many years. The strength and reliability of the Utility-50 are further enhanced by additional design features and build quality, a result of our UK-based manufacturing, including: an unbreakable polycarbonate lens with a hard coating, EMC protection - CISPR:25 (Class 3 or 5 available), automotive-grade corrosion resistance through our in-house pre-treatment and powder coating facility, and IP68 and IP69K rating. All of this is backed by our comprehensive 5-year warranty (2 years for non-automotive/industrial applications). Depending on the model selected, the Utility-50 comes with male/female Deutsch connectors. The Utility-50 also comes with a satin black painted stainless steel mounting system, either with loose M10 bolts and fasteners or fixed M10 bolts and fasteners, the latter simplifying installation in some cases.

Read more less

Balancing form and function, the Utility-50 is a medium-duty LED work light that delivers performance, style, durability, and functionality. At its core are four high-performance 13W premium-bin LEDs, delivering high illuminance levels suitable for a wide range of applications and vehicle and machine types. The carefully selected 5000K color temperature contributes to the definition of the light output, which is both powerful and comfortable for extended periods of use. Its high CRI (color rendering index) is proven to optimize sharpness and definition between shapes and colors. The Utility-50 delivers more than just a powerful work light. A version of the Utility-50 is available with an integrated red taillight function. Approved according to UNECE Regulation 148-R1, the red taillight features four contour markers in each corner of the lamp, creating a unique and stylish appearance in addition to its safety benefits. Additionally, a version of the lamp with an integrated amber flashing warning light function is available, approved according to UNECE Regulation 65, with or without the aforementioned red taillight function. With frontal dimensions shared with the Utility-80 HD, 107 mm (h) x 107 mm (w), this gives an indication of the lamp's lighting prowess, while the reduced depth of the lamp facilitates installation. This reduction in overall size does not come at the expense of performance, however, as the lamp has been carefully designed and engineered in-house in the UK to optimize light output while taking thermal conductivity into account, which is crucial for the lamp's longevity and trouble-free operation for many years. The strength and reliability of the Utility-50 are further enhanced by additional design features and build quality, a result of our UK-based manufacturing, including: an unbreakable polycarbonate lens with a hard coating, EMC protection - CISPR:25 (Class 3 or 5 available), automotive-grade corrosion resistance through our in-house pre-treatment and powder coating facility, and IP68 and IP69K rating. All of this is backed by our comprehensive 5-year warranty (2 years for non-automotive/industrial applications). Depending on the model selected, the Utility-50 comes with male/female Deutsch connectors. The Utility-50 also comes with a satin black painted stainless steel mounting system, either with loose M10 bolts and fasteners or fixed M10 bolts and fasteners, the latter simplifying installation in some cases.

Read more less

Balancing form and function, the Utility-50 is a medium-duty LED work light that delivers performance, style, durability, and functionality. At its core are four high-performance 13W premium-bin LEDs, delivering high illuminance levels suitable for a wide range of applications and vehicle and machine types. The carefully selected 5000K color temperature contributes to the definition of the light output, which is both powerful and comfortable for extended periods of use. Its high CRI (color rendering index) is proven to optimize sharpness and definition between shapes and colors. The Utility-50 delivers more than just a powerful work light. A version of the Utility-50 is available with an integrated red taillight function. Approved according to UNECE Regulation 148-R1, the red taillight features four contour markers in each corner of the lamp, creating a unique and stylish appearance in addition to its safety benefits. Additionally, a version of the lamp with an integrated amber flashing warning light function is available, approved according to UNECE Regulation 65, with or without the aforementioned red taillight function. With frontal dimensions shared with the Utility-80 HD, 107 mm (h) x 107 mm (w), this gives an indication of the lamp's lighting prowess, while the reduced depth of the lamp facilitates installation. This reduction in overall size does not come at the expense of performance, however, as the lamp has been carefully designed and engineered in-house in the UK to optimize light output while taking thermal conductivity into account, which is crucial for the lamp's longevity and trouble-free operation for many years. The strength and reliability of the Utility-50 are further enhanced by additional design features and build quality, a result of our UK-based manufacturing, including: an unbreakable polycarbonate lens with a hard coating, EMC protection - CISPR:25 (Class 3 or 5 available), automotive-grade corrosion resistance through our in-house pre-treatment and powder coating facility, and IP68 and IP69K rating. All of this is backed by our comprehensive 5-year warranty (2 years for non-automotive/industrial applications). Depending on the model selected, the Utility-50 comes with male/female Deutsch connectors. The Utility-50 also comes with a satin black painted stainless steel mounting system, either with loose M10 bolts and fasteners or fixed M10 bolts and fasteners, the latter simplifying installation in some cases.

Read more less

Balancing form and function, the Utility-50 is a medium-duty LED work light that delivers performance, style, durability, and functionality. At its core are four high-performance 13W premium-bin LEDs, delivering high illuminance levels suitable for a wide range of applications and vehicle and machine types. The carefully selected 5000K color temperature contributes to the definition of the light output, which is both powerful and comfortable for extended periods of use. Its high CRI (color rendering index) is proven to optimize sharpness and definition between shapes and colors. The Utility-50 delivers more than just a powerful work light. A version of the Utility-50 is available with an integrated red taillight function. Approved according to UNECE Regulation 148-R1, the red taillight features four contour markers in each corner of the lamp, creating a unique and stylish appearance in addition to its safety benefits. Additionally, a version of the lamp with an integrated amber flashing warning light function is available, approved according to UNECE Regulation 65, with or without the aforementioned red taillight function. With frontal dimensions shared with the Utility-80 HD, 107 mm (h) x 107 mm (w), this gives an indication of the lamp's lighting prowess, while the reduced depth of the lamp facilitates installation. This reduction in overall size does not come at the expense of performance, however, as the lamp has been carefully designed and engineered in-house in the UK to optimize light output while taking thermal conductivity into account, which is crucial for the lamp's longevity and trouble-free operation for many years. The strength and reliability of the Utility-50 are further enhanced by additional design features and build quality, a result of our UK-based manufacturing, including: an unbreakable polycarbonate lens with a hard coating, EMC protection - CISPR:25 (Class 3 or 5 available), automotive-grade corrosion resistance through our in-house pre-treatment and powder coating facility, and IP68 and IP69K rating. All of this is backed by our comprehensive 5-year warranty (2 years for non-automotive/industrial applications). Depending on the model selected, the Utility-50 comes with male/female Deutsch connectors. The Utility-50 also comes with a satin black painted stainless steel mounting system, either with loose M10 bolts and fasteners or fixed M10 bolts and fasteners, the latter simplifying installation in some cases.

Read more less

Through continuous improvement and the introduction of the latest and most efficient LED technology, the highly versatile Utility Series sets itself apart from other work light solutions. The product range includes high-performance 45- and 80-watt spotlights, as well as smaller 25- and 45-watt Work Lights that are equally impressive in performance and reliability, but better suited to the needs of 4WD, light commercial vehicles, and heavy-duty trucks. Each luminaire in the range consists of four high-density LEDs that deliver their light output through a highly reflective, vacuum-metallized optic. This was designed and developed in the UK using advanced CAD design and lighting simulation software. The result: symmetrical light distribution over a wider area provides greater brightness and—because the LEDs are carefully selected for their color temperature—proven maximum clarity with less fatigue and strain that can occur when using higher color ranges. The light output is even more impressive considering the comparatively small dimensions of the spotlights. The consistently high light output is ensured by an innovative CAE-optimized "matrix" cooling system. The increased surface area ensures that the heat generated during operation is dissipated from the unit more efficiently. This process allows for maximum light output for longer. At the same time, the electronic thermal management system optimizes light output based on the ambient and thermal conditions of the luminaire. The Utility Series is a product range designed for long life and withstands even the harshest environmental conditions. The hard-coated polycarbonate lens is bonded to ensure water resistance and backs up the comprehensive 5-year warranty*. The luminaires have been extensively tested to meet EU regulations regarding shock, vibration, and corrosion resistance. In addition to the extremely robust construction, the advanced electronic design ensures full EMC protection according to CISPR-25 (Class 3)†. Featuring Deutsch male/female connectors (Part No. DT06-2S/DT04-2P), the heavy-duty Utility-45/80 are also available with a choice of wide or slim mounts and the option for ADR-compliant versions (UT-45/80 only). * – 5-year warranty applies to use in passenger cars and commercial fleets, for all other applications a 2-year warranty applies. † – CISPR-25 (Class 3) applies only to 12 V use unless otherwise specified.

Read more less

Through continuous improvement and the introduction of the latest and most efficient LED technology, the highly versatile Utility Series sets itself apart from other work light solutions. The product range includes high-performance 45- and 80-watt spotlights, as well as smaller 25- and 45-watt Work Lights that are equally impressive in performance and reliability, but better suited to the needs of 4WD, light commercial vehicles, and heavy-duty trucks. Each luminaire in the range consists of four high-density LEDs that deliver their light output through a highly reflective, vacuum-metallized optic. This was designed and developed in the UK using advanced CAD design and lighting simulation software. The result: symmetrical light distribution over a wider area provides greater brightness and—because the LEDs are carefully selected for their color temperature—proven maximum clarity with less fatigue and strain that can occur when using higher color ranges. The light output is even more impressive considering the comparatively small dimensions of the spotlights. The consistently high light output is ensured by an innovative CAE-optimized "matrix" cooling system. The increased surface area ensures that the heat generated during operation is dissipated from the unit more efficiently. This process allows for maximum light output for longer. At the same time, the electronic thermal management system optimizes light output based on the ambient and thermal conditions of the luminaire. The Utility Series is a product range designed for long life and withstands even the harshest environmental conditions. The hard-coated polycarbonate lens is bonded to ensure water resistance and backs up the comprehensive 5-year warranty*. The luminaires have been extensively tested to meet EU regulations regarding shock, vibration, and corrosion resistance. In addition to the extremely robust construction, the advanced electronic design ensures full EMC protection according to CISPR-25 (Class 3)†. Featuring Deutsch male/female connectors (Part No. DT06-2S/DT04-2P), the heavy-duty Utility-45/80 are also available with a choice of wide or slim mounts and the option for ADR-compliant versions (UT-45/80 only). * – 5-year warranty applies to use in passenger cars and commercial fleets, for all other applications a 2-year warranty applies. † – CISPR-25 (Class 3) applies only to 12 V use unless otherwise specified.

Read more less

Through continuous improvement and the introduction of the latest and most efficient LED technology, the highly versatile Utility Series sets itself apart from other work light solutions. The product range includes high-performance 45- and 80-watt spotlights, as well as smaller 25- and 45-watt Work Lights that are equally impressive in performance and reliability, but better suited to the needs of 4WD, light commercial vehicles, and heavy-duty trucks. Each luminaire in the range consists of four high-density LEDs that deliver their light output through a highly reflective, vacuum-metallized optic. This was designed and developed in the UK using advanced CAD design and lighting simulation software. The result: symmetrical light distribution over a wider area provides greater brightness and—because the LEDs are carefully selected for their color temperature—proven maximum clarity with less fatigue and strain that can occur when using higher color ranges. The light output is even more impressive considering the comparatively small dimensions of the spotlights. The consistently high light output is ensured by an innovative CAE-optimized "matrix" cooling system. The increased surface area ensures that the heat generated during operation is dissipated from the unit more efficiently. This process allows for maximum light output for longer. At the same time, the electronic thermal management system optimizes light output based on the ambient and thermal conditions of the luminaire. The Utility Series is a product range designed for long life and withstands even the harshest environmental conditions. The hard-coated polycarbonate lens is bonded to ensure water resistance and backs up the comprehensive 5-year warranty*. The luminaires have been extensively tested to meet EU regulations regarding shock, vibration, and corrosion resistance. In addition to the extremely robust construction, the advanced electronic design ensures full EMC protection according to CISPR-25 (Class 4)†. The Utility-25 comes with Deutsch plugs/sockets (part no. DT06-2S/DT04-2P) and a matte black painted stainless steel mounting system that allows flexible mounting of the light in many different orientations. * – 5-year warranty applies to use in passenger cars and commercial fleets, for all other applications a 2-year warranty applies. † – CISPR-25 (Class 4) applies only to 12 V use unless otherwise specified.

Read more less

Through continuous improvement and the introduction of the latest and most efficient LED technology, the highly versatile Utility Series sets itself apart from other work light solutions. The product range includes high-performance 45- and 80-watt spotlights, as well as smaller 25- and 45-watt Work Lights that are equally impressive in performance and reliability, but better suited to the needs of 4WD, light commercial vehicles, and heavy-duty trucks. Each luminaire in the range consists of four high-density LEDs that deliver their light output through a highly reflective, vacuum-metallized optic. This was designed and developed in the UK using advanced CAD design and lighting simulation software. The result: symmetrical light distribution over a wider area provides greater brightness and—because the LEDs are carefully selected for their color temperature—proven maximum clarity with less fatigue and strain that can occur when using higher color ranges. The light output is even more impressive considering the comparatively small dimensions of the spotlights. The consistently high light output is ensured by an innovative CAE-optimized "matrix" cooling system. The increased surface area ensures that the heat generated during operation is dissipated from the unit more efficiently. This process allows for maximum light output for longer. At the same time, the electronic thermal management system optimizes light output based on the ambient and thermal conditions of the luminaire. The Utility Series is a product range designed for long life and withstands even the harshest environmental conditions. The hard-coated polycarbonate lens is bonded to ensure water resistance and backs up the comprehensive 5-year warranty*. The luminaires have been extensively tested to meet EU regulations regarding shock, vibration, and corrosion resistance. In addition to the extremely robust construction, the advanced electronic design ensures full EMC protection according to CISPR-25 (Class 5)†. The Utility-25 comes with Deutsch plugs/sockets (part no. DT06-2S/DT04-2P) and a matte black painted stainless steel mounting system that allows flexible mounting of the light in many different orientations. * – 5-year warranty applies to use in passenger cars and commercial fleets, for all other applications a 2-year warranty applies. † – CISPR-25 (Class 5) applies only to 12 V use unless otherwise specified.

Read more less

The iconic Triple-R automotive range offers exceptional, long-range LED auxiliary lights. Originally developed for the uncompromising demands of professional racing and rallying, it has since established itself as a firm favorite in the car, 4x4, van, and truck markets—both on- and off-road. The latest additions to the Triple-R range boast innovative features and functionality, including a patent-pending technology never before used in an LED auxiliary light bar. Triple-R Elite products incorporate an array of highly efficient, high-quality LEDs with a carefully selected color temperature of 5000K and 80 CRI for a high degree of sharpness and clarity, making them our most powerful driving lights. The electronics and optical design combine to deliver incredible long-distance illumination with enviable left/right dispersion. Thanks to the comparatively low upward and downward dispersion of the emitted light, the Elite lights are also suitable for roof mounting, avoiding glare on the hood. The Standard products feature an integrated (optional) white and/or amber sidelight, further enhancing the design and increasing safety. Combined with a high-quality overall design, you can be sure your Triple-R product will impress even before sunset! High-efficiency 11W LEDs provide impressive long-distance illumination, although visibility to the left and right may not be as high as with the equivalent Elite-class products. The slightly wider up/down spread makes the products suitable for mounting at high altitudes on a vehicle, such as on the cab of a truck or the roof of a van or other light commercial vehicle. Triple-R products are available in a wide range of sizes, from the 230 mm Triple-R 750 to the 1305 mm Triple-R 28 Elite. All models up to the 590 mm Triple-R 1250 meet the requirements of UNECE Regulation 112 for high beam. In many cases, certification is only achieved with Boost technology, which offers dual light output and allows the lamps to be used in both Boost and ECE-certified modes, depending on country-specific regulations and whether the lamps are used on or off-road. Like all Lazer high-performance lights, the Triple-R range is designed, developed, and built in our UK factory. So you can be assured of exceptional, high-end product design, coupled with superior light output, all backed by our comprehensive 5-year warranty.

Read more less

The latest generation of the Triple-R range delivers exceptional, long-range auxiliary LED automotive lighting. Originally developed for the uncompromising demands of professional racing on track and in rally, the range has become a firm favorite across the passenger car, 4x4, light commercial vehicle, and heavy-duty vehicle markets, both on- and off-road. The latest additions to the Triple-R range offer innovative features and functionality, including patented technology never before seen in an auxiliary LED light bar. Featuring an array of highly efficient, premium 'bin' LEDs at a carefully selected color temperature of 5000K, with 80CRI for high levels of sharpness and clarity, the Triple-R Elite products represent our most powerful driving lights. The electronics and optical design work together to deliver incredible distance illumination, yet with an enviable left/right beam angle. The comparatively low up/down scatter of light emitted by the Elite lights ensures their suitability for roof mounting, avoiding reflected glare from the vehicle's hood. With the exception of the Triple-R 750 Wide, all Standard products feature an integrated (optional) white and/or amber Position Light function for added style and safety benefits. In addition to the premium design of the lights themselves, you can be sure your Triple-R product will impress even before sunset! High-output 11W LEDs provide impressive distance illumination, although not quite with the same left/right visibility found on equivalent Elite products. However, a slightly higher up/down spread ensures suitability when mounted high on a vehicle, such as a truck cab or the roof of a van or other light commercial vehicle. Available in a variety of sizes from the 230mm (9”) Triple-R 750 to the 1305mm (51”) Triple-R 28 Elite, all Triple-R products up to the 590mm (23”) Triple-R 1250 are approved for use as high beams under UNECE Regulation 112. In many cases, certification is only achieved through the use of dual-output E-Boost technology, which allows the lamp to be used in both E-Boost and E-Mark compliant modes, depending on country-specific regulations and whether the lights are used on or off-road. Like all Lazer high performance lights, the Triple-R range is designed, engineered and built in-house in the UK, you can be completely assured of exceptional high-end product design, coupled with superior lighting levels, all backed by our comprehensive 5-year warranty.

Read more less

The iconic Triple-R automotive range offers exceptional, long-range LED auxiliary lights. Originally developed for the uncompromising demands of professional racing and rallying, it has since established itself as a firm favorite in the car, 4x4, van, and truck markets—both on- and off-road. The latest additions to the Triple-R range boast innovative features and functionality, including a patent-pending technology never before used in an LED auxiliary light bar. Triple-R Elite products incorporate an array of highly efficient, high-quality LEDs with a carefully selected color temperature of 5000K and 80 CRI for a high degree of sharpness and clarity, making them our most powerful driving lights. The electronics and optical design combine to deliver incredible long-distance illumination with enviable left/right dispersion. Thanks to the comparatively low upward and downward dispersion of the emitted light, the Elite lights are also suitable for roof mounting, avoiding glare on the hood. The Standard products feature an integrated (optional) white and/or amber sidelight, further enhancing the design and increasing safety. Combined with a high-quality overall design, you can be sure your Triple-R product will impress even before sunset! High-efficiency 11W LEDs provide impressive long-distance illumination, although visibility to the left and right may not be as high as with the equivalent Elite-class products. The slightly wider up/down spread makes the products suitable for mounting at high altitudes on a vehicle, such as on the cab of a truck or the roof of a van or other light commercial vehicle. Triple-R products are available in a wide range of sizes, from the 230 mm Triple-R 750 to the 1305 mm Triple-R 28 Elite. All models up to the 590 mm Triple-R 1250 meet the requirements of UNECE Regulation 112 for high beam. In many cases, certification is only achieved with Boost technology, which offers dual light output and allows the lamps to be used in both Boost and ECE-certified modes, depending on country-specific regulations and whether the lamps are used on or off-road. Like all Lazer high-performance lights, the Triple-R range is designed, developed, and built in our UK factory. So you can be assured of exceptional, high-end product design, coupled with superior light output, all backed by our comprehensive 5-year warranty.

Read more less

The iconic Triple-R automotive range offers exceptional, long-range LED auxiliary lights. Originally developed for the uncompromising demands of professional racing and rallying, it has since established itself as a firm favorite in the car, 4x4, van, and truck markets—both on- and off-road. The latest additions to the Triple-R range boast innovative features and functionality, including a patent-pending technology never before used in an LED auxiliary light bar. Triple-R Elite products incorporate an array of highly efficient, high-quality LEDs with a carefully selected color temperature of 5000K and 80 CRI for a high degree of sharpness and clarity, making them our most powerful driving lights. The electronics and optical design combine to deliver incredible long-distance illumination with enviable left/right dispersion. Thanks to the comparatively low upward and downward dispersion of the emitted light, the Elite lights are also suitable for roof mounting, avoiding glare on the hood. The Standard products feature an integrated (optional) white and/or amber sidelight, further enhancing the design and increasing safety. Combined with a high-quality overall design, you can be sure your Triple-R product will impress even before sunset! High-efficiency 11W LEDs provide impressive long-distance illumination, although visibility to the left and right may not be as high as with the equivalent Elite-class products. The slightly wider up/down spread makes the products suitable for mounting at high altitudes on a vehicle, such as on the cab of a truck or the roof of a van or other light commercial vehicle. Triple-R products are available in a wide range of sizes, from the 230 mm Triple-R 750 to the 1305 mm Triple-R 28 Elite. All models up to the 590 mm Triple-R 1250 meet the requirements of UNECE Regulation 112 for high beam. In many cases, certification is only achieved with Boost technology, which offers dual light output and allows the lamps to be used in both Boost and ECE-certified modes, depending on country-specific regulations and whether the lamps are used on or off-road. Like all Lazer high-performance lights, the Triple-R range is designed, developed, and built in our UK factory. So you can be assured of exceptional, high-end product design, coupled with superior light output, all backed by our comprehensive 5-year warranty.

Read more less

The Elite+ range represents an evolution of our high-performance LED lighting solutions, featuring products with enhanced performance, light distribution, and functionality. These improvements are achieved in part by placing additional amber LEDs in each lamp, which can be combined with the already superior white high beam function. The result is impressive visibility in the dark with a slightly softer, more relaxing color temperature. The amber LEDs can also be operated on their own, directing the light slightly downward and toward the edges of the road, making this function ideal in snow, fog, or dust. The lights are designed to switch between the various lighting modes via a button. The lighting modes are: Boost (white only), Combi (white + amber), Snow/Fog/Dust mode (amber only), and ECE Mark (white only; approved for road use with reduced power according to UNECE Regulation 149). The memory function in the light ensures that the previously selected mode is retained, for example, when the vehicle is restarted. If you hold the button for two seconds, the light immediately switches to ECE Mark mode. The impressive proportions of the Triple-R 1250 are reflected in the lamp's performance. Thanks to an advanced electronic design, the lamp consists of a combination of 24 white LEDs and 20 amber LEDs. In boost mode, the white LEDs produce 12,028 raw lumens. In combo mode, the white and amber LEDs together produce 21,388 raw lumens – an incredible light output for safer and more enjoyable nighttime driving. All LEDs together consume 220 W at a current of 16.9 A (at 14 V). To support lamp operation and electrical installation, the lamp features a high-performance 2-pin Econoseal and 3-pin Superseal connector. Each lamp also includes appropriate vehicle-mounted wiring harnesses. The Econoseal connector is responsible for the high beam operation of the light, while the Superseal connectors are for function selection and the choice between white and amber parking light/tail light. Like all Lazer products, the Elite+ range is designed, engineered, and manufactured in the UK to exacting standards for performance, reliability, and appearance. The light's modern design is particularly impressive up close, but the real eye-opener comes when you turn it on at night! Backed by our comprehensive 5-year warranty and lifetime lens guarantee, you can rest assured this product will last for years, even in the harshest environments.

Read more less

The iconic Triple-R automotive range offers exceptional, long-range LED auxiliary lights. Originally developed for the uncompromising demands of professional racing and rallying, it has since established itself as a firm favorite in the car, 4x4, van, and truck markets—both on- and off-road. The latest additions to the Triple-R range boast innovative features and functionality, including a patent-pending technology never before used in an LED auxiliary light bar. Triple-R Elite products incorporate an array of highly efficient, high-quality LEDs with a carefully selected color temperature of 5000K and 80 CRI for a high degree of sharpness and clarity, making them our most powerful driving lights. The electronics and optical design combine to deliver incredible long-distance illumination with enviable left/right dispersion. Thanks to the comparatively low upward and downward dispersion of the emitted light, the Elite lights are also suitable for roof mounting, avoiding glare on the hood. The Standard products feature an integrated (optional) white and/or amber sidelight, further enhancing the design and increasing safety. Combined with a high-quality overall design, you can be sure your Triple-R product will impress even before sunset! High-efficiency 11W LEDs provide impressive long-distance illumination, although visibility to the left and right may not be as high as with the equivalent Elite-class products. The slightly wider up/down spread makes the products suitable for mounting at high altitudes on a vehicle, such as on the cab of a truck or the roof of a van or other light commercial vehicle. Triple-R products are available in a wide range of sizes, from the 230 mm Triple-R 750 to the 1305 mm Triple-R 28 Elite. All models up to the 590 mm Triple-R 1250 meet the requirements of UNECE Regulation 112 for high beam. In many cases, certification is only achieved with Boost technology, which offers dual light output and allows the lamps to be used in both Boost and ECE-certified modes, depending on country-specific regulations and whether the lamps are used on or off-road. Like all Lazer high-performance lights, the Triple-R range is designed, developed, and built in our UK factory. So you can be assured of exceptional, high-end product design, coupled with superior light output, all backed by our comprehensive 5-year warranty.

Read more less

The TRIPLE-R 1000 Elite with Intelligent High Beam Assist (i-LBA) redefines the performance and functionality of LED auxiliary high beams. It offers a combination of highly efficient LEDs, finely tuned light distribution, and the use of photocells integrated into the high beam. When using the low beam, the headlight switches to High Beam Assist mode, which maintains additional illumination in all areas where no oncoming vehicles or obstacles are detected, allowing the driver a smoother transition between high and low beam. With 26 LEDs producing 11,068 raw lumens, it delivers exceptional long-distance illumination of 1 lux at 681 m and 44 degrees left/right spread. In low beam assist mode, the high beam LEDs are deactivated when the high beam is switched off. Low beam assist ensures excellent roadside visibility as the light monitors oncoming traffic and road conditions more than 30 times per second. Continuous recalibration of the sensors ensures the light responds to changing environmental conditions during operation. A delay in reactivating the high beam assist prevents distracting "flashing" by switching it on and off, and a second switch allows the driver to deactivate the high beam assist when circumstances require. Certified as a high beam according to ECE Regulation 112, the headlight features double light output boost technology, which allows the light intensity to be increased beyond the limits of ECE Regulation 112 when driving off-road or in countries where it is legally permitted. As with all Triple-R products, the exceptional design of the lights is complemented by our UK-based manufacturing. This ensures the product will continue to look and perform well for years to come – all backed by a comprehensive 5-year warranty. An all-aluminum housing, an advanced breathable Gore-Tex silicone membrane, and a polycarbonate lens (with a lifetime warranty) are just a few features that make the light ideal for even the harshest environments.

Read more less

The iconic Triple-R automotive range offers exceptional, long-range LED auxiliary lights. Originally developed for the uncompromising demands of professional racing and rallying, it has since established itself as a firm favorite in the car, 4x4, van, and truck markets—both on- and off-road. The latest additions to the Triple-R range boast innovative features and functionality, including a patent-pending technology never before used in an LED auxiliary light bar. Triple-R Elite products incorporate an array of highly efficient, high-quality LEDs with a carefully selected color temperature of 5000K and 80 CRI for a high degree of sharpness and clarity, making them our most powerful driving lights. The electronics and optical design combine to deliver incredible long-distance illumination with enviable left/right dispersion. Thanks to the comparatively low upward and downward dispersion of the emitted light, the Elite lights are also suitable for roof mounting, avoiding glare on the hood. The Standard products feature an integrated (optional) white and/or amber sidelight, further enhancing the design and increasing safety. Combined with a high-quality overall design, you can be sure your Triple-R product will impress even before sunset! High-efficiency 11W LEDs provide impressive long-distance illumination, although visibility to the left and right may not be as high as with the equivalent Elite-class products. The slightly wider up/down spread makes the products suitable for mounting at high altitudes on a vehicle, such as on the cab of a truck or the roof of a van or other light commercial vehicle. Triple-R products are available in a wide range of sizes, from the 230 mm Triple-R 750 to the 1305 mm Triple-R 28 Elite. All models up to the 590 mm Triple-R 1250 meet the requirements of UNECE Regulation 112 for high beam. In many cases, certification is only achieved with Boost technology, which offers dual light output and allows the lamps to be used in both Boost and ECE-certified modes, depending on country-specific regulations and whether the lamps are used on or off-road. Like all Lazer high-performance lights, the Triple-R range is designed, developed, and built in our UK factory. So you can be assured of exceptional, high-end product design, coupled with superior light output, all backed by our comprehensive 5-year warranty.

Read more less

The ST/T Evolution series features highly efficient, high-quality 11W "bin" LEDs combined with vacuum-metallized conical optics, delivering a powerful beam pattern with a wide spread. This makes the products particularly suitable for rural and off-road applications. The electrical design and product design of the ST and T lights are identical. The former designates lights certified as high beams according to UNECE Regulation 112, while the latter designates the larger, non-certified light bars intended for off-road use, which are operated only via an independent switch. Available in sizes ranging from 12 mm for the ST2 to 1164 mm for the T28, these LED light bars are extremely versatile, having been used in a wide variety of applications and vehicle types since their launch in 2010. Since then, the range has been updated and redesigned, incorporating the latest and greatest technology and a more modern, seamless, and low-profile design that facilitates installation, is more resistant to dirt, snow, and ice buildup, and undoubtedly complements and enhances the appearance of modern vehicles. The superior light output is achieved by the 11-watt high-intensity LEDs combined with an advanced electronic design, a sophisticated thermal management system, and highly reflective, vacuum-metallized reflectors. This ensures maximum light is directed where it's needed: onto the road or path ahead. As with all Lazer products, the carefully selected LEDs with a color temperature of 5000 K provide maximum clarity and definition of your surroundings. Beyond performance, the ST/T Evolution LED light bars are built to last, backed by a comprehensive 5-year warranty. Designed, engineered, and manufactured in our UK factory, we never compromise on build quality. This ensures the lights' performance matches their appearance and the products will perform for years to come.

Read more less

The RP Hyperspot is an off-road LED headlight engineered for performance and durability. Featuring four high-quality, high-intensity "bin" LEDs with a total output of 45W, the light produces 4,520 raw lumens. It also features highly reflective, vacuum-metallized "boost" optics, specifically designed and engineered for impressive range (1 lux at 524 m). The RP Hyperspot is backlit, with customers choosing between white and amber color options. To complement and enhance the impressive light output, an extensive range of clip-on lens covers is available, including black and yellow attachment lenses and diffusers. Like all Lazer products, the RP Hyperspot headlamp was designed, developed, and manufactured in our UK factory. The product is built to withstand harsh environments and is backed by our comprehensive 5-year warranty. Design features such as electronic thermal management, a shatter-resistant polycarbonate lens with a hard coating, and a CAE-optimized heatsink ensure you can rely on this product for many years to come.

Read more less

Introducing Glide, the world's first "molded" LED light bar. Featuring a monocoque lens construction that provides highly weight-efficient inherent strength and robustness, Glide is a series of 20" curved light bars that boast an ultra-slim design. Its enviable balance between exceptional light output and OE-quality aesthetics, blending harmoniously with the front contours of a wide variety of vehicle makes, models, and makes Glide an exceptional choice, particularly in the passenger car and light commercial vehicle sectors. The "Standard" Glide products offer incredible value considering their design, performance, and build quality. At their core, 18 premium bin LEDs work in conjunction with the vacuum-metallized optical system to deliver just over 11,000 raw lumens with strong long-distance illumination (1 lux @ 548 m) and a 60-degree horizontal beam spread. Each Glide lamp features a Dynamic Dip mode, providing a smooth transition between high and low output modes. The low output mode allows for riding in compliance with UNECE Regulation 149 (double E-marking) where required by local law, and/or a reduced output level that, for example, reduces glare from highly reflective surfaces like large road signs. The Dynamic Dip function is activated after the light has been on for more than 2 seconds by simply and quickly turning the light off and back on. Each lamp comes with a side-mounting kit, while additional mounting options are available to customize your installation—choose between a license plate bracket or, for added security, an anti-theft side-mounting kit. For below-the-license-plate installations, the side-mounting kit should be used in conjunction with our universal license plate mounting kit (sold separately). The Glide series of low-profile molded light bars, like all Lazer LED lighting solutions, are engineered and manufactured to unparalleled standards and are equipped with advanced and innovative features to maximize performance and longevity. With Glide, you can be confident in exceptional, high-end product design combined with superior illumination levels, all backed by our comprehensive 5-year warranty.

Read more less

Introducing Glide, the world's first "molded" LED light bar. Featuring a monocoque lens construction that provides highly weight-efficient inherent strength and robustness, Glide is a series of 20" curved light bars that boast an ultra-slim design. Its enviable balance between exceptional light output and OE-quality aesthetics, blending harmoniously with the front contours of a wide variety of vehicle makes, models, and makes Glide an exceptional choice, particularly in the passenger car and light commercial vehicle sectors. As befits any Lazer product bearing the "Elite" tag, the Glide Elite delivers the highest levels of uniform light output for its size in a carefully engineered beam pattern derived from a combination of spot and wide-angle optics and LED array. These optics, vacuum-metallized in-house by Lazer to maximize reflectivity, utilize the 12,900 raw lumens to deliver 1 lux up to 624 m while maintaining a 66-degree horizontal spread of light. The "Premium Bin" LEDs used in the Glide Elite lamps are carefully selected for their 80CRI, a high color rendering index that provides more definition of colors and shapes for clearer, safer trails. Each Glide lamp features a Dynamic Dip mode, providing a smooth transition between high and low output modes. The low output mode allows for riding in compliance with UNECE Regulation 149 (double E-marking) where required by local law, and/or a reduced output level that, for example, reduces glare from highly reflective surfaces like large road signs. The Dynamic Dip function is activated after the light has been on for more than 2 seconds by simply and quickly turning the light off and back on. Each lamp comes with a side-mounting kit, while additional mounting options are available to customize your installation—choose between a license plate bracket or, for added security, an anti-theft side-mounting kit. For below-the-license-plate installations, the side-mounting kit should be used in conjunction with our universal license plate mounting kit (sold separately). The Glide series of low-profile molded light bars, like all Lazer LED lighting solutions, are engineered and manufactured to unparalleled standards and equipped with advanced and innovative features to maximize performance and longevity. With Glide, you can be confident in exceptional, high-end product design combined with superior lighting levels, all backed by our comprehensive 5-year warranty.

Read more less

Introducing Glide, the world's first "molded" LED light bar. Featuring a monocoque lens construction that provides highly weight-efficient inherent strength and robustness, Glide is a series of 20" curved light bars that boast an ultra-slim design. Its enviable balance between exceptional light output and OE-quality aesthetics, blending harmoniously with the front contours of a wide variety of vehicle makes, models, and makes Glide an exceptional choice, particularly in the passenger car and light commercial vehicle sectors. The "Standard" Glide products offer incredible value considering their design, performance, and build quality. At their core, 18 premium bin LEDs work in conjunction with the vacuum-metallized optical system to deliver just over 11,000 raw lumens with strong long-distance illumination (1 lux @ 548 m) and a 60-degree horizontal beam spread. Each Glide lamp features a Dynamic Dip mode, providing a smooth transition between high and low output modes. The low output mode allows for riding in compliance with UNECE Regulation 149 (double E-marking) where required by local law, and/or a reduced output level that, for example, reduces glare from highly reflective surfaces like large road signs. The Dynamic Dip function is activated after the light has been on for more than 2 seconds by simply and quickly turning the light off and back on. Unlock both style and safety with Glide LED light bars, which feature an optional integrated white Position Light that's fully legal for road use under UNECE Regulation 148. Each light comes with a side-mounting kit, while additional mounting options are available to customize your installation—choose between a license plate bracket or, for added security, an anti-theft side-mounting kit. For below-the-license-plate installations, the side-mounting kit should be used in conjunction with our universal license plate mounting kit (sold separately). The Glide series of low-profile molded light bars, like all Lazer LED lighting solutions, are engineered and manufactured to unparalleled standards and equipped with advanced and innovative features to maximize performance and longevity. With Glide, you can be confident in exceptional, high-end product design combined with superior lighting levels, all backed by our comprehensive 5-year warranty.

Read more less